SN74AUC16245 Datasheet, PDF (1/9 Pages) Texas Instruments – 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

SN74AUC16245
16-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES392E – MARCH 2002 – REVISED DECEMBER 2002
D Member of the Texas Instruments
Widebus Family
D Optimized for 1.8-V Operation and is 3.6-V
I/O Tolerant to Support Mixed-Mode Signal
Operation
D I_off Supports Partial-Power-Down Mode
Operation
D Sub 1-V Operable
D Max t_pd of 2 ns at 1.8 V
D Low Power Consumption, 20-µA Max I_CC
D ±8-mA Output Drive at 1.8 V
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
description/ordering information
This 16-bit (dual-octal) noninverting bus
transceiver is operational at 0.8-V to 2.7-V V_CC,
but is designed specifically for 1.65-V to 1.95-V
V_CC operation.
The SN74AUC16245 is designed for
asynchronous communication between data
buses. The control-function implementation
minimizes external timing requirements.
DGG OR DGV PACKAGE
(TOP VIEW)
1DIR 1
1B1 2
1B2 3
GND 4
1B3 5
1B4 6
V_CC 7
1B5 8
1B6 9
GND 10
1B7 11
1B8 12
2B1 13
2B2 14
GND 15
2B3 16
2B4 17
V_CC 18
2B5 19
2B6 20
GND 21
2B7 22
2B8 23
2DIR 24
48 1OE
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CC
41 1A5
40 1A6
39 GND
38 1A7
37 1A8
36 2A1
35 2A2
34 GND
33 2A3
32 2A4
31 V_CC
30 2A5
29 2A6
28 GND
27 2A7
26 2A8
25 2OE
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the
A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TSSOP – DGG
Tape and reel SN74AUC16245DGGR AUC16245
–40°C to 85°C TVSOP – DGV
Tape and reel SN74AUC16245DGVR MH245
VFBGA – GQL
Tape and reel SN74AUC16245GQLR MH245
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design}
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2002, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1