SN74ALVCH32245 Datasheet, PDF (1/8 Pages) Texas Instruments – 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

D Member of the Texas Instruments
Widebus+ ™ Family
D EPIC™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
SN74ALVCH32245
32-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES282 – OCTOBER 1999
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
D Packaged in Plastic Fine-Pitch Ball Grid
Array Package
description
This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74ALVCH32245 is designed for asynchronous communication between data buses. The
control-function implementation minimizes external timing requirements.
This device can be used as four 8-bit transceivers, two 16-bit transceivers, or one 32-bit transceiver. It allows
data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at
the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the
buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVCH32245 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each 8-bit section)
INPUTS
OE DIR
OPERATION
L
L
B data to A bus
L
H A data to B bus
H
X
Isolation
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus+ are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1