SN74ALVCH16373 Datasheet, PDF (1/9 Pages) Texas Instruments – 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS

SN74ALVCH16373
16-BIT TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCES020C – JULY 1995 – REVISED FEBRUARY 1999
D Member of the Texas Instruments
Widebus ™ Family
D EPIC ™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D ESD Protection Exceeds 2000 V Per
MIL-STD-833, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA Per
JESD 17
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
This 16-bit transparent D-type latch is designed
for 1.65-V to 3.6-V V_CC operation.
The SN74ALVCH16373 is particularly suitable for
implementing buffer registers, I/O ports,
bidirectional bus drivers, and working registers.
This device can be used as two 8-bit latches or
one 16-bit latch. When the latch-enable (LE) input
is high, the Q outputs follow the data (D) inputs.
When LE is taken low, the Q outputs are latched
at the levels set up at the D inputs.
DGG OR DL PACKAGE
(TOP VIEW)
1OE 1
1Q1 2
1Q2 3
GND 4
1Q3 5
1Q4 6
V_CC 7
1Q5 8
1Q6 9
GND 10
1Q7 11
1Q8 12
2Q1 13
2Q2 14
GND 15
2Q3 16
2Q4 17
V_CC 18
2Q5 19
2Q6 20
GND 21
2Q7 22
2Q8 23
2OE 24
48 1LE
47 1D1
46 1D2
45 GND
44 1D3
43 1D4
42 V_CC
41 1D5
40 1D6
39 GND
38 1D7
37 1D8
36 2D1
35 2D2
34 GND
33 2D3
32 2D4
31 V_CC
30 2D5
29 2D6
28 GND
27 2D7
26 2D8
25 2LE
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high
or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive
the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus
lines without need for interface or pullup components. OE does not affect internal operations of the latch. Old
data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVCH16373 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1