SN74ALVC16374 Datasheet, PDF (1/11 Pages) Texas Instruments – 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS

SN74ALVC16374
16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
WITH 3-STATE OUTPUTS
SCAS258A – JANUARY 1993 – REVISED MAY 1995
D Member of the Texas Instruments
Widebus ™ Family
D EPIC ™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Typical V_OLP (Output Ground Bounce)
< 0.8 V at V_CC = 3.3 V, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot)
> 2 V at V_CC = 3.3 V, T_A = 25°C
D Bus Hold On Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D ESD Protection Exceeds 2000 V Per
MIL-STD-833C, Method 3015; Exceeds
200 V Using Machine Model (C = 200 pF,
R = 0)
D Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
D Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
This 16-bit edge-triggered D-type flip-flop is
designed for 3.3-V V_CC operation; it is tested at
2.5-V, 2.7-V, and 3.3-V V_CC.
DGG OR DL PACKAGE
(TOP VIEW)
1OE ¹
1Q1 ²
1Q2 ³
GND ⁴
1Q3 ⁵
1Q4 ⁶
V_CC ⁷
1Q5 ⁸
1Q6 ⁹
GND ¹⁰
1Q7 ¹¹
1Q8 ¹²
2Q1 ¹³
2Q2 ¹⁴
GND ¹⁵
2Q3 ¹⁶
2Q4 ¹⁷
V_CC ¹⁸
2Q5 ¹⁹
2Q6 ²⁰
GND ²¹
2Q7 ²²
2Q8 ²³
2OE ²⁴
48 _1CLK
47 _1D1
46 _1D2
45 _GND
44 _1D3
43 _1D4
42 _VCC
41 _1D5
40 _1D6
39 _GND
38 _1D7
37 _1D8
36 _2D1
35 _2D2
34 _GND
33 _2D3
32 _2D4
31 _VCC
30 _2D5
29 _2D6
28 _GND
27 _2D7
26 _2D8
25 _2CLK
The SN74ALVC16374 is particularly suitable
for implementing buffer registers, I/O ports,
bidirectional bus drivers, and working registers. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. On
the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the
data (D) inputs. OE) can be used to place the eight outputs in either a normal logic state (high- or low-logic levels)
or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines
significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without
need for interface or pullup components. OE does not affect internal operations of the flip-flop. Old data can be
retained or new data can be entered while the outputs are in the high-impedance state.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVC16374 is available in TI’s shrink small-outline (DL) and thin shrink small-outline (DGG)
packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the
same printed-circuit-board area.
The SN74ALVC16374 is characterized for operation from – 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1