SN74ALVC16334_07 Datasheet, PDF (1/13 Pages) Texas Instruments – 16-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS

www.ti.com
FEATURES
• Member of the Texas Instruments Widebus™
Family
• Operates From 1.65 V to 3.6 V
• Max t_pd of 3.2 ns at 3.3 V
• ±24-mA Output Drive at 3.3 V
• Ideal for Use in PC100 Register DIMM
• Designed to Comply With JEDEC 168-Pin and
200-Pin SDRAM Buffered DIMM Specification
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
This 16-bit universal bus driver is designed for 1.65-V
to 3.6-V V_CC operation.
Data flow from A to Y is controlled by the
output-enable (OE) input. The device operates in the
transparent mode when the latch-enable (LE) input is
low. When LE is high, the A data is latched if the
clock (CLK) input is held at a high or low logic level. If
LE is high, the A data is stored in the latch/flip-flop on
the low-to-high transition of CLK. When OE is high,
the outputs are in the high-impedance state.
To ensure the high-impedance state during power up
or power down, OE should be tied to V_CC through a
pullup resistor; the minimum value of the resistor is
determined by the current-sinking capability of the
driver.
SN74ALVC16334
16-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES128E – FEBRUARY 1998 – REVISED SEPTEMBER 2004
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
OE ¹
Y1 ²
Y2 ³
GND ⁴
Y3 ⁵
Y4 ⁶
V_CC ⁷
Y5 ⁸
Y6 ⁹
GND ¹⁰
Y7 ¹¹
Y8 ¹²
Y9 ¹³
Y10 ¹⁴
GND ¹⁵
Y11 ¹⁶
Y12 ¹⁷
V_CC ¹⁸
Y13 ¹⁹
Y14 ²⁰
GND ²¹
Y15 ²²
Y16 ²³
NC ²⁴
48 _CLK
47 _A1
46 _A2
45 _GND
44 _A3
43 _A4
42 _VCC
41 _A5
40 _A6
39 _GND
38 _A7
37 _A8
36 _A9
35 _A10
34 _GND
33 _A11
32 _A12
31 _VCC
30 _A13
29 _A14
28 _GND
27 _A15
26 _A16
25 _LE
NC − No internal connection
T_A
-40°C to 85°C
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
SSOP - DL
Tube
Tape and reel
SN74ALVC16334DL
SN74ALVC16334DLR
TSSOP - DGG
Tape and reel
SN74ALVC16334DGGR
TVSOP - DGV
Tape and reel
SN74ALVC16334DGVR
TOP-SIDE MARKING
ALVC16334
ALVC16334
VC334
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2004, Texas Instruments Incorporated