SN74ALVC162836 Datasheet, PDF (1/10 Pages) Texas Instruments – 20-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS

D Member of the Texas Instruments
Widebus™ Family
D EPIC ™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Output Port Has Equivalent 26-Ω Series
Resistors, So No External Resistors Are
Required
D Designed to Comply With JEDEC 168-Pin
and 200-Pin SDRAM Buffered DIMM
Specification
D Package Options Include Plastic Shrink
Small-Outline (DL), Thin Shrink
Small-Outline (DGG), and Thin Very
Small-Outline (DGV) Packages
description
This 20-bit universal bus driver is designed for
1.65-V to 3.6-V V_CC operation.
Data flow from A to Y is controlled by the
output-enable (OE) input. The device operates in
the transparent mode when the latch-enable (LE)
input is low. When LE is high, the A data is latched
if the clock (CLK) input is held at a high or low logic
level. If LE is high, the A data is stored in the
latch/flip-flop on the low-to-high transition of CLK.
When OE is high, the outputs are in the
high-impedance state.
The output port includes equivalent 26-Ω series
resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power
up or power down, OE should be tied to V_CC
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
The SN74ALVC162836 is characterized for
operation from –40°C to 85°C.
SN74ALVC162836
20-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES129B – MARCH 1998 – REVISED FEBRUARY 1999
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
OE 1
Y1 2
Y2 3
GND 4
Y3 5
Y4 6
V_CC 7
Y5 8
Y6 9
Y7 10
GND 11
Y8 12
Y9 13
Y10 14
Y11 15
Y12 16
Y13 17
GND 18
Y14 19
Y15 20
Y16 21
V_CC 22
Y17 23
Y18 24
GND 25
Y19 26
Y20 27
NC 28
56 CLK
55 A1
54 A2
53 GND
52 A3
51 A4
50 V_CC
49 A5
48 A6
47 A7
46 GND
45 A8
44 A9
43 A10
42 A11
41 A12
40 A13
39 GND
38 A14
37 A15
36 A16
35 V_CC
34 A17
33 A18
32 GND
31 A19
30 A20
29 LE
NC – No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1