SN74ALS232B Datasheet, PDF (1/8 Pages) Texas Instruments – 16 × 4 ASYNCHRONOUS FIRST-IN, FIRST-OUT MEMORY

SN74ALS232B
16 × 4 ASYNCHRONOUS FIRST-IN, FIRST-OUT MEMORY
D Independent Asynchronous Inputs and
Outputs
D 16 Words by 4 Bits
D Data Rates up to 40 MHz
D Fall-Through Time 14 ns Typical
D 3-State Outputs
D Package Options Include Plastic
Small-Outline Package (DW), Plastic Chip
Carriers (FN), and Standard Plastic 300-mil
DIPs (N)
SCAS251B – FEBRUARY 1989 – REVISED APRIL 1998
DW OR N PACKAGE
(TOP VIEW)
OE 1
FULL 2
LDCK 3
D0 4
D1 5
D2 6
D3 7
GND 8
16 V_CC
15 UNCK
14 EMPTY
13 Q0
12 Q1
11 Q2
10 Q3
9 RST
description
This 64-bit memory features high speed and fast
fall-through times. It is organized as 16 words by
4 bits.
FN PACKAGE
(TOP VIEW)
A first-in, first-out (FIFO) memory is a storage
device that allows data to be written into and read
from its array at independent data rates. This
FIFO is designed to process data at rates up to
40 MHz in a bit-parallel format, word by word.
Data is written into memory on a low-to-high
transition at the load-clock (LDCK) input and is
read out on a low-to-high transition at the
unload-clock (UNCK) input. The memory is full
when the number of words clocked in exceeds by
16 the number of words clocked out. When the
memory is full, LDCK signals have no effect on the
data residing in memory. When the memory is
empty, UNCK signals have no effect.
LDCK
D0
NC
D1
D2
3 2 1 20 19
4
18
5
17
6
16
7
15
8
14
9 10 11 12 13
EMPTY
Q0
NC
Q1
Q2
NC – No internal connection
Status of the FIFO memory is monitored by the FULL and EMPTY output flags. The FULL output is low when
the memory is full and high when it is not full. The EMPTY output is low when the memory is empty and high
when it is not empty.
A low level on the reset (RST) input resets the internal stack-control pointers and also sets EMPTY low and sets
FULL high. The Q outputs are not reset to any specific logic level. The first low-to-high transition on LDCK, after
either a RST pulse or from an empty condition, causes EMPTY to go high and the data to appear on the
Q outputs. It is important to note that the first word does not have to be unloaded. Data outputs are noninverting
with respect to the data inputs and are at high impedance when the output-enable (OE) input is low. OE does
not affect the FULL or EMPTY output flags. Cascading is easily accomplished in the word-width direction but
is not possible in the word-depth direction.
The SN74ALS232B is characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1998, Texas Instruments Incorporated
1