SN65LVDS96 Datasheet, PDF (1/14 Pages) Texas Instruments – LVDS SERDES RECEIVER

SN65LVDS96
LVDS SERDES RECEIVER
D 3:21 Data Channel Expansion at up to
1.3 Gigabits per Second Throughput
D Suited for Point-to-Point Subsystem
Communication With Very Low EMI
D 3 Data Channels and Clock Low-Voltage
Differential Channels in and 21 Data and
Clock Low-Voltage TTL Channels Out
D Operates From a Single 3.3-V Supply and
250 mW (Typ)
D 5-V Tolerant SHTDN Input
D Rising Clock Edge Triggered Outputs
D Bus Pins Tolerate 4-kV HBM ESD
D Packaged in Thin Shrink Small-Outline
Package With 20 Mil Terminal Pitch
D Consumes <1 mW When Disabled
D Wide Phase-Lock Input Frequency Range
20 MHz to 67 MHz
D No External Components Required for PLL
D Inputs Meet or Exceed the Requirements of
ANSI EIA/TIA-644 Standard
D Industrial Temperature Qualified
T_A = – 40°C to 85°C
D Replacement for the DS90CR216
description
SLLS296F – MAY 1998 – REVISED FEBRUARY 2000
DGG PACKAGE
(TOP VIEW)
D17 1
D18 2
GND 3
D19 4
D20 5
NC 6
LVDSGND 7
A0M 8
A0P 9
A1M 10
A1P 11
LVDSV_CC 12
LVDSGND 13
A2M 14
A2P 15
CLKINM 16
CLKINP 17
LVDSGND ¹⁸
PLLGND ¹⁹
PLLV_CC ²⁰
PLLGND ²¹
SHTDN ²²
CLKOUT ²³
D0 ²⁴
48 V_CC
47 D16
46 D15
45 D14
44 GND
43 D13
42 V_CC
41 D12
40 D11
39 D10
38 GND
37 D9
36 V_CC
35 D8
34 D7
33 D6
32 GND
31 _D5
30 _D4
29 _D3
28 _VCC
27 _D2
26 _D1
25 _GND
The SN65LVDS96 LVDS serdes (serializer/deserializer) receiver contains three serial-in 7-bit parallel-out shift
registers, a 7× clock synthesizer, and four low-voltage differential signaling (LVDS) line receivers in a single
integrated circuit. These functions allow receipt of synchronous data from a compatible transmitter, such as
the SN65LVDS95, over four balanced-pair conductors and expansion to 21 bits of single-ended LVTTL
synchronous data at a lower transfer rate.
When receiving, the high-speed LVDS data is received and loaded into registers at the rate of seven times the
LVDS input clock (CLKIN). The data is then unloaded to a 21-bit wide LVTTL parallel bus at the CLKIN rate. A
phase-locked loop clock synthesizer circuit generates a 7× clock for internal clocking and an output clock for
the expanded data. The SN65LVDS96 presents valid data on the rising edge of the output clock (CLKOUT).
The SN65LVDS96 requires only four line termination resistors for the differential inputs and little or no control.
The data bus appears the same at the input to the transmitter and output of the receiver with data transmission
transparent to the user(s). The only user intervention is the possible use of the shutdown/clear (SHTDN)
active-low input to inhibit the clock and shut off the LVDS receivers for lower power consumption. A low level
on this signal clears all internal registers to a low level.
The SN65LVDS96 is characterized for operation over ambient air temperatures of – 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1