SN65LVDS048 Datasheet, PDF (1/13 Pages) Texas Instruments – LVDS QUAD DIFFERENTIAL LINE RECEIVER

SN65LVDS048
LVDS QUAD DIFFERENTIAL LINE RECEIVER
D >400 Mbps (200 MHz) Signaling Rates
D Flow-Through Pinout Simplifies PCB
Layout
D 50 ps Channel-to-Channel Skew (Typ)
D 200 ps Differential Skew (Typ)
D Propagation Delay Times 2.7 ns (Typ)
D 3.3 V Power Supply Design
D High-Impedance LVDS Inputs on Power
Down
D Low-Power Dissipation (40 mW at 3.3 V
Static)
D Accepts Small Swing (350 mV) Differential
Signal Levels
D Supports Open, Short, and Terminated
Input Fail-Safe
D Industrial Operating Temperature Range
(–40°C to 85°C)
D Conforms to TIA/EIA-644 LVDS Standard
D Available in SOIC and TSSOP Packages
D Pin-Compatible With DS90LV048A From
National
SLLS415A – JUNE 2000 – REVISED SEPTEMBER 2000
NOT RECOMMENDED FOR NEW DESIGNS
For Replacement Use SN65LVDS048A
D OR PW PACKAGE
(TOP VIEW)
R_{IN1– 1}
R_{IN1+ 2}
R_{IN2+ 3}
R_{IN2– 4}
R_{IN3– 5}
R_{IN3+ 6}
R_IN4+ 7
R_IN4– 8
16 EN
15 ^ROUT1
14 ^ROUT2
13 ^V_CC
12 ^GND
11 ^R_OUT3
10 R_OUT4
9 _EN
functional diagram
EN
EN
R_IN1+
R_IN1–
R1
R_OUT1
description
The SN65LVDS048 is a quad differential line receiver
that implements the electrical characteristics of
low-voltage differential signaling (LVDS). This signaling
technique lowers the output voltage levels of 5-V
differential standard levels (such as EIA/TIA-422B) to
reduce the power, increase the switching speeds, and
allow operation with a 3.3-V supply rail. Any of the quad
differential receivers will provide a valid logical output
state with a ±100-mV differential input voltage within the
input common-mode voltage range. The input
common-mode voltage range allows 1 V of ground
potential difference between two LVDS nodes.
R_IN2+
R_IN2–
R_IN3+
R_IN3–
R_IN4+
R_IN4–
R2
R_OUT2
R3
R_OUT3
R4
R_OUT4
The intended application of this device and signaling technique is for point-to-point baseband data transmission
over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board
traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation
characteristics of the media, the noise coupling to the environment, and other system characteristics.
The SN65LVDS048 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1