SN65LBC175A Datasheet, PDF (1/14 Pages) Texas Instruments – QUADRUPLE RS-485 DIFFERENTIAL LINE RECEIVERS

SN65LBC175A, SN75LBC175A
QUADRUPLE RSĆ485 DIFFERENTIAL LINE RECEIVERS
SLLS455B − NOVEMBER 2000 − REVISED MARCH 2005
D Designed for TIA/EIA-485, TIA/EIA-422, and
ISO 8482 Applications
D Signaling Rate¹ Exceeding 50 Mbps
D Fail-Safe in Bus Short-Circuit, Open-Circuit,
and Idle-Bus Conditions
D ESD Protection on Bus Inputs
Exceeds 6 kV
D Common-Mode Bus Input Range
–7 V to 12 V
D Propagation Delay Times <16 ns
D Low Standby Power Consumption <20 µA
D Pin-Compatible Upgrade for MC3486,
DS96F175, LTC489, and SN75175
SN65LBC175A (Marked as 65LBC175A)
SN75LBC175A (Marked as 75LBC175A)
D or N PACKAGE
(TOP VIEW)
1B 1
1A 2
1Y 3
1,2EN 4
2Y 5
2A 6
2B 7
GND 8
16 V_CC
15 4B
14 4A
13 4Y
12 3,4EN
11 3Y
10 3A
9 3B
logic diagram
description
1,2EN
The SN65LBC175A and SN75LBC175A are
1A
1Y
quadruple differential line receivers with 3-state
1B
outputs, designed for TIA/EIA-485 (RS-485),
TIA/EIA-422 (RS-422), and ISO 8482 (Euro
2A
RS-485) applications.
2Y
2B
These devices are optimized for balanced
multipoint bus communication at data rates up to
3,4EN
and exceeding 50 million bits per second. The
transmission media may be twisted-pair cables,
3A
3Y
printed-circuit board traces, or backplanes. The
3B
ultimate rate and distance of data transfer is
dependent upon the attenuation characteristics of
4A
the media and the noise coupling to the
4B
4Y
environment.
Each receiver operates over a wide range of positive and negative common-mode input voltages, and features
ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh
environments. These devices are designed using LinBiCMOSt, facilitating low power consumption and
inherent robustness.
Two EN inputs provide pair-wise enable control, or these can be tied together externally to enable all four drivers
with the same signal.
The SN75LBC175A is characterized for operation over the temperature range of 0°C to 70°C. The
SN65LBC175A is characterized over the temperature range from −40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinBiCMOS is a trademark of Texas Instruments.
1The _{signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).}
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2001, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1