SN65HVD10-EP Datasheet, PDF (1/22 Pages) Texas Instruments – 3.3 V RS-485 TRANSCEIVERS

www.ti.com
SN65HVD10-EP, SN65HVD11-EP
SN65HVD12-EP
SGLS278E – DECEMBER 2004 – REVISED SEPTEMBER 2007
3.3 V RS-485 TRANSCEIVERS
FEATURES
1
• Controlled Baseline
– One Assembly/Test Site
– One Fabrication Site
• Extended Temperature Performance of Up to
–40°C to 125°C and –55°C to 125°C
• Enhanced Diminishing Manufacturing Sources
(DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree ⁽¹⁾
• Operates With a 3.3 V Supply
• Bus-Pin ESD Protection Exceeds 16 kV HBM
• 1/8 Unit-Load Option Available (Up to 256
Nodes on the Bus)
• Optional Driver Output Transition Times for
Signaling Rates of 1 Mbps, 10 Mbps, and
25 Mbps ⁽²⁾
• Meets or Exceeds the Requirements of ANSI
TIA/EIA-485-A
• Bus-Pin Short Circuit Protection From –7 V to
12 V
• Low-Current Standby Mode . . . 1 μA (Typ)
• Open-Circuit, Idle-Bus, and Shorted-Bus
Failsafe Receiver
• Thermal Shutdown Protection
• Glitch-Free Power-Up and Power-Down
Protection for Hot-Plugging Applications
• SN75176 Footprint
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
(2) The signaling rate of a line is the number of voltage
transitions that are made per second expressed in the units
bps (bits per second).
APPLICATIONS
• Digital Motor Control
• Utility Meters
• Chassis-to-Chassis Interconnects
• Electronic Security Stations
• Industrial Process Control
• Building Automation
• Point-of-Sale (POS) Terminals and Networks
D PACKAGE
(TOP VIEW)
R
1
RE
2
DE
3
D
4
8
V_CC
7
B
6
A
5 GND
DESCRIPTION/ORDERING INFORMATION
The SN65HVD10, SN65HVD11, and SN65HVD12
combine a 3-state differential line driver and
differential input line receiver that operate with a
single 3.3 V power supply. They are designed for
balanced transmission lines and meet or exceed
ANSI standard TIA/EIA-485-A and ISO 8482:1993.
These differential bus transceivers are monolithic
integrated circuits designed for bidirectional data
communication on multipoint bus-transmission lines.
The drivers and receivers have active-high and
active-low enables respectively, that can be externally
connected together to function as direction control.
Low device standby supply current can be achieved
by disabling the driver and the receiver.
The driver differential outputs and receiver differential
inputs connect internally to form a differential
input/output (I/O) bus port that is designed to offer
minimum loading to the bus whenever the driver is
disabled or V_CC = 0. These parts feature wide positive
and negative common-mode voltage ranges, making
them suitable for party-line applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2007, Texas Instruments Incorporated