SN55173_06 Datasheet, PDF (1/18 Pages) Texas Instruments – QUADRUPLE DIFFERENTIAL LINE RECEVERS

SN55173, SN65173, SN75173
QUADRUPLE DIFFERENTIAL LINE RECEIVERS
D Meet or Exceed the Requirements of
TIA/EIA-422-B, TIA/EIA-423-B, and
TIA/EIA-485-A and ITU Recommendations
V.10, V.11, X.26, and X.27
D Designed for Multipoint Bus Transmission
on Long Bus Lines in Noisy Environments
D 3-State Outputs
D Common-Mode Input Voltage Range of
– 12 V to 12 V
D Input Sensitivity . . . ± 200 mV
D Input Hysteresis . . . 50 mV Typ
D High Input Impedance . . . 12 kΩ Min
D Operate From Single 5-V Supply
D Low Power Requirements
D Pin-to-Pin Replacement for AM26LS32
SLLS144E – OCTOBER 1980 – REVISED APRIL 2000
SN55173 . . . J PACKAGE
SN65173, SN75173 . . . D OR N PACKAGE
(TOP VIEW)
1B 1
1A 2
1Y 3
G4
2Y 5
2A 6
2B ⁷
GND ⁸
16 V_CC
15 4B
14 4A
13 4Y
12 G
11 3Y
10 _3A
9 _3B
SN55173 . . . FK PACKAGE
(TOP VIEW)
description
The SN55173, SN65173, and SN75173 are
monolithic quadruple differential line receivers
with 3-state outputs. They are designed to meet
the requirements of TIA/EIA-422-B,
TIA/EIA-423-B, TIA/EIA-485-A, and several ITU
recommendations. The standards are for
balanced multipoint bus transmission at rates up
to 10 megabits per second. The four receivers
share two OR enable inputs, one active when
high, the other active when low. These devices
feature high input impedance, input hysteresis for
increased noise immunity, and input sensitivity of
± 200 mV over a common-mode input voltage
range of – 12 V to 12 V. Fail-safe design specifies
that if the inputs are open circuited, the outputs are
always high. The SN65173 and SN75173 are
designed for optimum performance when used
with the SN75172 or SN75174 quad differential
line drivers.
1Y
3 2 1 20 19
4
18
4A
G₅
17 ^4Y
NC 6
16 NC
2Y 7
15 G
2A 8
14 3Y
9 10 11 12 13
NC – No internal connection
THE SN55173 IS NOT RECOMMENDED
FOR NEW DESIGNS.
The SN55173 is characterized over the full military temperature range of – 55°C to 125°C. The SN65173 is
characterized for operation from –40°C to 85°C. The SN75173 is characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1