SN54LVTH541_08 Datasheet, PDF (1/15 Pages) Texas Instruments – 3.3-V ABT OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

D Support Mixed-Mode Signal Operation (5-V
Input and Output Voltages With 3.3-V V_CC)
D Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
D Support Unregulated Battery Operation
Down to 2.7 V
D I_off and Power-Up 3-State Support Hot
Insertion
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D Latch-Up Performance Exceeds 500 mA Per
JESD 17
D ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
SN54LVTH541, SN74LVTH541
3.3ĆV ABT OCTAL BUFFERS/DRIVERS
WITH 3ĆSTATE OUTPUTS
SCBS682G − MARCH 1997 − REVISED OCTOBER 2003
SN54LVTH541 . . . J OR W PACKAGE
SN74LVTH541 . . . DB, DW, NS, OR PW PACKAGE
(TOP VIEW)
OE1 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND 10
20 V_CC
19 OE2
18 Y1
17 Y2
16 Y3
15 Y4
14 Y5
13 Y6
12 Y7
11 Y8
SN54LVTH541 . . . FK PACKAGE
(TOP VIEW)
description/ordering information
These octal buffers/drivers are designed
specifically for low-voltage (3.3-V) V_CC operation,
but with the capability to provide a TTL interface
to a 5-V system environment.
The ’LVTH541 devices are ideal for driving bus
lines or buffer-memory address registers. These
devices feature inputs and outputs on opposite
sides of the package that facilitate printed circuit
board layout.
A3
3 2 1 20 19
4
18
Y1
A4 ₅
17 ^Y2
A5 6
16 Y3
A6 7
15 Y4
A7 8
14 Y5
9 10 11 12 13
The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2)
input is high, all outputs are in the high-impedance state.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SOIC − DW
Tube
Tape and reel
SN74LVTH541DW
LVTH541
SN74LVTH541DWR
−40°C to 85°C
SOP − NS
SSOP − DB
Tape and reel
Tape and reel
SN74LVTH541NSR
SN74LVTH541DBR
LVTH541
LXH541
Tube
TSSOP − PW
Tape and reel
SN74LVTH541PW
LXH541
SN74LVTH541PWR
CDIP − J
Tube
SNJ54LVTH541J
SNJ54LVTH541J
−55°C to 125°C CFP − W
Tube
SNJ54LVTH541W SNJ54LVTH541W
LCCC - FK
Tube
SNJ54LVTH541FK SNJ54LVTH541FK
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design}
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2003, Texas Instruments Incorporated
1