SN54LVT245B Datasheet, PDF (1/7 Pages) Texas Instruments – 3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

D State-of-the-Art Advanced BiCMOS
Technology (ABT) Design for 3.3-V
Operation and Low Static-Power
Dissipation
D Support Mixed-Mode Signal Operation (5-V
Input and Output Voltages With 3.3-V V_CC)
D Support Unregulated Battery Operation
Down to 2.7 V
D Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
D I_off and Power-Up 3-State Support Hot
Insertion
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Chip Carriers (FK),
Ceramic Flat (W) Packages, and Ceramic
(J) DIPs
description
SN54LVT245B, SN74LVT245B
3.3-V ABT OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCES004D – JANUARY 1995 – REVISED APRIL 2000
SN54LVT245B . . . J OR W PACKAGE
SN74LVT245B . . . DB, DW, OR PW PACKAGE
(TOP VIEW)
DIR 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND ¹⁰
20 V_CC
19 OE
18 B1
17 B2
16 B3
15 B4
14 B5
13 B6
12 B7
11 _B8
SN54LVT245B . . . FK PACKAGE
(TOP VIEW)
3 2 1 20 19
A3 4
18 B1
A4 5
17 B2
A5 6
16 B3
A6 7
15 B4
A7 8
14 B5
9 10 11 12 13
These octal bus transceivers are designed
specifically for low-voltage (3.3-V) V_CC operation,
but with the capability to provide a TTL interface
to a 5-V system environment.
These devices are designed for asynchronous communication between data buses. They transmit data from
the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the devices so the buses are effectively isolated.
When V_CC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 1.5 V, OE should be tied to V_CC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
These devices are fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry
disables the outputs, preventing damaging current backflow through the devices when they are powered down.
The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,
which prevents driver conflict.
The SN54LVT245B is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74LVT245B is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1