SN54LVCH244A Datasheet, PDF (1/9 Pages) Texas Instruments – OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

D EPIC™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Typical V_OLP (Output Ground Bounce)
< 0.8 V at V_CC = 3.3 V, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot)
> 2 V at V_CC = 3.3 V, T_A = 25°C
D Power Off Disables Outputs, Permitting
Live Insertion
D Support Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
3.3-V V_CC)
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA Per
JESD 17
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Flat (W) Package,
Ceramic Chip Carriers (FK), and DIPs (J)
SN54LVCH244A, SN74LVCH244A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCES009G – JULY 1995 - REVISED JUNE 1998
SN54LVCH244A . . . J OR W PACKAGE
SN74LVCH244A . . . DB, DW, OR PW PACKAGE
(TOP VIEW)
1OE ₁
1A1 ₂
2Y4 3
1A2 4
2Y3 5
1A3 6
2Y2 7
1A4 8
2Y1 9
GND 10
20 ^V_CC
19 ^2OE
18 1Y1
17 2A4
16 1Y2
15 2A3
14 1Y3
13 2A2
12 1Y4
11 2A1
SN54LVCH244A . . . FK PACKAGE
(TOP VIEW)
1A2
3 2 1 20 19
4
18
1Y1
2Y3 ₅
17 ^2A4
1A3 6
16 1Y2
2Y2 7
15 2A3
1A4 8
14 1Y3
9 10 11 12 13
description
The SN54LVCH244A octal buffer/line driver is designed for 2.7-V to 3.6-V V_CC operation and the
SN74LVCH244A octal buffer/line driver is designed for 1.65-V to 3.6-V V_CC operation.
These devices are organized as two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low,
these devices pass data from the A inputs to the Y outputs. When OE is high, the outputs are in the
high-impedance state.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54LVCH244A is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74LVCH244A is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1998, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1