SN54BCT652 Datasheet, PDF (1/7 Pages) Texas Instruments – OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS

• State-of-the-Art BiCMOS Design
Significantly Reduces I_CCZ
• ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model (C = 200 pF,
R = 0)
• Independent Registers and Enables for
A and B Buses
• Multiplexed Real-Time and Stored Data
• Power-Up High-Impedance Mode
• Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK) and Flatpacks (W), and
Standard Plastic and Ceramic 300-mil DIPs
(JT, NT)
SN54BCT652, SN74BCT652
OCTAL BUS TRANSCEIVERS AND REGISTERS
WITH 3-STATE OUTPUTS
SCBS038A – AUGUST 1989 – REVISED NOVEMBER 1993
SN54BCT652 . . . JT OR W PACKAGE
SN74BCT652 . . . DW OR NT PACKAGE
(TOP VIEW)
CLKAB 1
SAB 2
OEAB 3
A1 4
A2 5
A3 6
A4 7
A5 8
A6 9
A7 10
A8 11
GND 12
24 V_CC
23 CLKBA
22 SBA
21 OEBA
20 B1
19 B2
18 B3
17 B4
16 B5
15 B6
14 B7
13 B8
description
These devices consist of bus transceiver circuits,
D-type flip-flops, and control circuitry arranged for
multiplexed transmission of data directly from the
data bus or from the internal storage registers.
Output-enable (OEAB and OEBA) inputs are
provided to control the transceiver functions.
Select-control (SAB and SBA) inputs are provided
to select whether real-time or stored data is
transferred. The circuitry used for select control
eliminates the typical decoding glitch that occurs
in a multiplexer during the transition between
stored and real-time data. A low input selects
real-time data, and a high input selects stored
data. Figure 1 illustrates the four fundamental
bus-management functions that can be performed
with the ′BCT652.
SN54BCT652 . . . FK PACKAGE
(TOP VIEW)
4 3 2 1 28 27 26
A1 5
25 _OEBA
A2 6
24 _B1
A3 7
23 _B2
NC 8
22 _NC
A4 9
21 _B3
A5 10
20 B4
A6 11
19 B5
12 13 14 15 16 17 18
NC – No internal connection
Data on the A or B data bus, or both, can be stored in the internal D-type flip-flops by low-to-high transitions at
the appropriate clock (CLKAB or CLKBA) inputs regardless of the select- or enable-control pins. When SAB and
SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type flip-flops by
simultaneously enabling OEAB and OEBA. In this configuration each output reinforces its input. Therefore,
when all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remain at
its last state.
The SN54BCT652 is characterized for operation over the full military temperature range of – 55°C to 125°C. The
SN74BCT652 is characterized for operation from 0°C to 70°C.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1993, Texas Instruments Incorporated
2–1