SN54BCT574_07 Datasheet, PDF (1/18 Pages) Texas Instruments – OCTAL TRANSPARENT D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

D Operating Voltage Range of 4.5 V to 5.5 V
D State-of-the-Art BiCMOS Design
Significantly Reduces I_CCZ
D Full Parallel Access for Loading
SN54BCT574 . . . J OR W PACKAGE
SN74BCT574 . . . DB, DW, N, OR NS PACKAGE
(TOP VIEW)
SN54BCT574, SN74BCT574
OCTAL TRANSPARENT D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCBS074C – SEPTEMBER 1991 – REVISED MARCH 2003
D ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
SN54BCT574 . . . FK PACKAGE
(TOP VIEW)
OE 1
1D 2
2D 3
3D 4
4D 5
5D 6
6D 7
7D 8
8D 9
GND 10
20 V_CC
19 1Q
18 2Q
17 3Q
16 4Q
15 5Q
14 6Q
13 7Q
12 8Q
11 CLK
3 2 1 20 19
3D 4
18 2Q
4D 5
17 _3Q
5D 6
16 _4Q
6D ⁷
15 _5Q
7D ⁸
14 _6Q
9 10 11 12 13
description/ordering information
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively
low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional
bus drivers, and working registers.
The eight flip-flops of the ’BCT574 devices are edge-triggered D-type flip-flops. On the positive transition of the
clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high
or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive
the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus
lines without interface or pullup components.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP – N
Tube
SN74BCT574N
SN74BCT574N
0°C to 70°C
SOIC – DW
Tube
Tape and reel
SN74BCT574DW
SN74BCT574DWR
BCT574
SOP – NS
Tape and reel SN74BCT574NSR
BCT574
SSOP – DB
Tape and reel SN74BCT574DBR
BT574
CDIP – J
Tube
SNJ54BCT574J
SNJ54BCT574J
–55°C to 125°C CFP – W
Tube
SNJ54BCT574W
SNJ54BCT574W
LCCC – FK
Tube
SNJ54BCT574FK
SNJ54BCT574FK
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1