SN54BCT574 Datasheet, PDF (1/5 Pages) Texas Instruments – OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

• State-of-the-Art BiCMOS Design
Significantly Reduces I_CCZ
• ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model (C = 200 pF,
R = 0)
• Full Parallel Access for Loading
• Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK) and Flatpacks (W), and
Plastic and Ceramic 300-mil DIPs (J, N)
description
SN54BCT574, SN74BCT574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCBS074B – SEPTEMBER 1991 – REVISED NOVEMBER 1993
SN54BCT574 . . . J OR W PACKAGE
SN74BCT574 . . . DW OR N PACKAGE
(TOP VIEW)
OE 1
1D 2
2D 3
3D 4
4D 5
5D 6
6D 7
7D 8
8D 9
GND 10
20 V_CC
19 1Q
18 2Q
17 3Q
16 4Q
15 5Q
14 6Q
13 7Q
12 8Q
11 CLK
These 8-bit flip-flops feature 3-state outputs
designed specifically for driving highly capacitive
or relatively low-impedance loads. They are
particularly suitable for implementing buffer
registers, I/O ports, bidirectional bus drivers, and
working registers.
The eight flip-flops of the ′BCT574 are
edge-triggered D-type flip-flops. On the positive
transition of the clock (CLK) input, the Q outputs
will be set to the logic levels that were set up at the
data (D) inputs.
SN54BCT574 . . . FK PACKAGE
(TOP VIEW)
3 2 1 20 19
3D 4
18 2Q
4D 5
17 _3Q
5D 6
16 _4Q
6D ⁷
15 _5Q
7D ⁸
14 _6Q
9 10 11 12 13
A buffered output-enable (OE) input can be used
to place the eight outputs in either a normal logic
state (high or low logic levels) or a high-
impedance state. In the high-impedance state, the
outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide
the capability to drive bus lines without need for interface or pullup components.
The output enable (OE) does not affect the internal operations of the flip-flops. Old data can be retained or new
data can be entered while the outputs are in the high-impedance state.
The SN54BCT574 is characterized for operation over the full military temperature range of – 55°C to 125°C. The
SN74BCT574 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
(each flip-flop)
INPUTS
OE CLK D
OUTPUT
Q
L
↑
H
H
L
↑
L
L
L H or L X
Q0
H
X
X
Z
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1993, Texas Instruments Incorporated
2–1