SN54AS181B Datasheet, PDF (1/13 Pages) Texas Instruments – ARITHMETIC LOGIC UNITS/FUNCTION GENERATORS

SN54AS181B, SN74AS181A
ARITHMETIC LOGIC UNITS/FUNCTION GENERATORS
• Full Look Ahead for High-Speed Operations
on Long Words
• Arithmetic Operating Modes:
– Addition
– Subtraction
– Shift Operand A One Position
– Magnitude Comparison
– Twelve Other Arithmetic Operations
• Logic Function Modes:
– Exclusive-OR
– Comparator
– AND, NAND, OR, NOR
• Package Options Include Plastic
Small-Outline (N) Packages, Ceramic (FK)
Chip Carriers, Standard Plastic (NT) and
Ceramic (JT) 300-mil DIPs, and Ceramic
(JW) 600-mil DIPs
description
SDAS209B – DECEMBER 1982 – REVISED DECEMBER 1994
SN54AS181B . . . JT OR JW PACKAGE
SN74AS181A . . . N OR NT PACKAGE
(TOP VIEW)
B0 1
A0 2
S3 3
S2 4
S1 5
S0 6
C_n 7
M8
F0 9
F1 10
F2 11
GND 12
24 V_CC
23 A1
22 B1
21 A2
20 B2
19 A3
18 B3
17 G
16 C_{n + 4}
15 P
14 A = B
13 F3
SN54AS181B . . . FK PACKAGE
(TOP VIEW)
The SN54AS181B and SN74AS181A arithmetic
logic units (ALUs) / function generators have a
complexity of 75 equivalent gates on a monolithic
chip. These circuits perform 16 binary arithmetic
operations on two 4-bit words as shown in
Tables 1 and 2. These operations are selected by
the four function-select (S0, S1, S2, and S3) lines
and include addition, subtraction, decrement, and
straight transfer. When performing arithmetic
manipulations, the internal carries are enabled by
applying a low-level voltage to the mode-control
(M) input. A full carry look-ahead scheme is used
to generate fast, simultaneous carry by means of
two cascade (G and P) outputs for the four bits in
the package.
4 3 2 1 28 27 26
S2 5
25 A2
S1 6
24 B2
S0 7
23 A3
NC 8
22 NC
C_{n 9}
21 B3
M ₁₀
20 G
F0 ₁₁
19 C_{n + 4}
12 13 14 15 16 17 18
NC – No internal connection
If high speed is not important, a ripple-carry (C_n) input and a ripple-carry (C_{n + 4}) output are available. The
ripple-carry delay is minimized so that arithmetic manipulations for small word lengths can be performed without
external circuitry.
The SN54AS181B and SN74AS181A accommodate active-high or active-low data if the pin designations are
interpreted as follows:
PIN NUMBER
2 1 23 22 21 20 19 18 9 10 11 13 7
16
15 17
Active-low data (Table 1) A0 B0 A1 B1 A2 B2 A3 B3 F0 F1 F2 F3 Cn Cn _{+ 4} P G
Active-high data (Table 2) A0 B0 A1 B1 A2 B2 A3 B3 F0 F1 F2 F3 Cn Cn _{+ 4} X Y
Subtraction is accomplished by 1’s complement addition where the 1’s complement of the subtrahend is
generated internally. The resultant output is A-B-1, which requires an end-around or forced carry to provide A-B.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1994, Texas Instruments Incorporated
1