SN54ABTR2245 Datasheet, PDF (1/8 Pages) Texas Instruments – OCTAL TRANSCEIVERS AND LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS

SN54ABTR2245, SN74ABTR2245
OCTAL TRANSCEIVERS AND LINE/MEMORY DRIVERS
WITH 3-STATE OUTPUTS
SCBS680A – MARCH 1997 – REVISED MAY 1997
D Outputs Have Equivalent 25-Ω Series
Resistors, So No External Resistors Are
Required
D State-of-the-Art EPIC-ΙΙB™ BiCMOS Design
Significantly Reduces Power Dissipation
D High-Impedance State During Power Up
and Power Down
D Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17
D ESD Protection Exceeds 2000 V Per
MIL-STD-833, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Typical V_OLP (Output Ground Bounce) < 1 V
at V_CC = 5 V, T_A = 25°C
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), and
Thin Very Small-Outline (DGV) Packages,
Ceramic Chip Carriers (FK), and Plastic (N)
and Ceramic (J) DIPs
description
These octal transceivers and line drivers are
designed for asynchronous communication
between data buses. The devices transmit data
from the A bus to the B bus or from the B bus to
the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable
(OE) input can be used to disable the device so
the buses are effectively isolated.
SN54ABTR2245 . . . J PACKAGE
SN74ABTR2245 . . . DB, DGV, DW, N, OR PW PACKAGE
(TOP VIEW)
DIR 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND ¹⁰
20 V_CC
19 OE
18 B1
17 B2
16 B3
15 B4
14 B5
13 B6
12 B7
11 _B8
SN54ABTR2245 . . . FK PACKAGE
(TOP VIEW)
A3
3 2 1 20 19
4
18
B1
A4 ₅
17 ^B2
A5 6
16 B3
A6 7
15 B4
A7 8
14 B5
9 10 11 12 13
Both the A-port and B-port outputs, which are designed to sink up to 12 mA, include equivalent 25-Ω series
resistors to reduce overshoot and undershoot.
When V_CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 2.1 V, OE should be tied to V_CC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABTR2245 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABTR2245 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OE DIR
OPERATION
L
L
B data to A bus
L
H A data to B bus
H
X
Isolation
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1997, Texas Instruments Incorporated
1