SN54ABT543A_07 Datasheet, PDF (1/21 Pages) Texas Instruments – OCTAL REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS

SN54ABT543A, SN74ABT543A
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS157F – JANUARY 1991 – REVISED MAY 1997
D State-of-the-Art EPIC-ΙΙB™ BiCMOS Design
Significantly Reduces Power Dissipation
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Typical V_OLP (Output Ground Bounce) < 1 V
at V_CC = 5 V, T_A = 25°C
D High-Drive Outputs (–32-mA I_OH, 64-mA I_OL)
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Chip Carriers (FK),
Ceramic Flat (W) Package, and Plastic (NT)
and Ceramic (JT) DIPs
description
SN54ABT543A . . . JT OR W PACKAGE
SN74ABT543A . . . DB, DW, NT, OR PW PACKAGE
(TOP VIEW)
LEBA 1
OEBA 2
A1 3
A2 4
A3 5
A4 6
A5 7
A6 8
A7 9
A8 10
CEAB 11
GND 12
24 V_CC
23 CEBA
22 B1
21 B2
20 B3
19 B4
18 B5
17 B6
16 B7
15 B8
14 LEAB
13 OEAB
The ’ABT543A octal transceivers contain two sets
of D-type latches for temporary storage of data
flowing in either direction. Separate latch-enable
(LEAB or LEBA) and output-enable (OEAB or
OEBA) inputs are provided for each register to
permit independent control in either direction of
data flow.
The A-to-B enable (CEAB) input must be low to
enter data from A or to output data from B. If CEAB
is low and LEAB is low, the A-to-B latches are
transparent; a subsequent low-to-high transition
of LEAB puts the A latches in the storage mode.
With CEAB and OEAB both low, the 3-state
B outputs are active and reflect the data present
at the output of the A latches. Data flow from B to
A is similar, but requires using the CEBA, LEBA,
and OEBA inputs.
To ensure the high-impedance state during power
up or power down, OE should be tied to V_CC
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
SN54ABT543A . . . FK PACKAGE
(TOP VIEW)
4 3 2 1 28 27 26
A2 5
25 B2
A3 6
24 B3
A4 7
23 B4
NC 8
22 NC
A5 9
21 B5
A6 10
20 B6
A7 11
19 B7
12 13 14 15 16 17 18
NC – No internal connection
The SN54ABT543A is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABT543A is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1997, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1