SN54ABT541 Datasheet, PDF (1/6 Pages) Texas Instruments – OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

D State-of-the-Art EPIC-ΙΙB™ BiCMOS Design
Significantly Reduces Power Dissipation
D Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17
D Typical V_OLP (Output Ground Bounce) < 1 V
at V_CC = 5 V, T_A = 25°C
D High-Impedance State During Power Up
and Power Down
D High-Drive Outputs (–32-mA I_OH, 64-mA I_OL)
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Chip Carriers (FK),
Ceramic Flat (W) Package, and Plastic (N)
and Ceramic (J) DIPs
description
SN54ABT541, SN74ABT541B
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS093K – JANUARY 1991 – REVISED OCTOBER 1998
SN54ABT541 . . . J OR W PACKAGE
SN74ABT541B . . . DB, DW, N, OR PW PACKAGE
(TOP VIEW)
OE1 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND 10
20 V_CC
19 OE2
18 Y1
17 Y2
16 Y3
15 Y4
14 Y5
13 Y6
12 Y7
11 Y8
SN54ABT541 . . . FK PACKAGE
(TOP VIEW)
The SN54ABT541 and SN74ABT541B octal
buffers and line drivers are ideal for driving bus
lines or buffering memory address registers. The
devices feature inputs and outputs on opposite
sides of the package to facilitate printed circuit
board layout.
The 3-state control gate is a two-input AND gate
with active-low inputs so that if either
output-enable (OE1 or OE2) input is high, all eight
outputs are in the high-impedance state.
A3
3 2 1 20 19
4
18
Y1
A4 ₅
17 ^Y2
A5 6
16 Y3
A6 7
15 Y4
A7 8
14 Y5
9 10 11 12 13
When V_CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 2.1 V, OE should be tied to V_CC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT541 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABT541B is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OE1 OE2 A
OUTPUT
Y
L
L
L
L
L
L
H
H
H
X
X
Z
X
H
X
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1