SN54ABT16245A_08 Datasheet, PDF (1/15 Pages) Texas Instruments – 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

www.ti.com
FEATURES
• Members of the Texas Instruments
Widebus™ Family
• State-of-the-Art EPIC-IIB™ BiCMOS Design
Significantly Reduces Power Dissipation
• Typical V_OLP (Output Ground Bounce) <1 V at
V_CC = 5 V, T_A = 25°C
• High-Impedance State During Power Up and
Power Down
• Distributed V_CC and GND Pin Configuration
Minimizes High-Speed Switching Noise
• Flow-Through Architecture Optimizes PCB
Layout
• High-Drive Outputs (–32-mA I_OH, 64-mA I_OL)
• Latch-Up Performance Exceeds 500 mA Per
JESD 70
• ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
• Package Options Includes Plastic Thin Very
Small-Outline (DGV), Shrink Small-Outline
(DL), and Thin Shrink Small-Outline (DGG)
Packages and 380-mil Fine-Pitch Ceramic
(WD) Flat Package Using 25-mil
Center-to-Center Spacings
SN54ABT16245A, SN74ABT16245A
16-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS300G – MARCH 1994 – REVISED JANUARY 2006
SN54ABT16245A . . . WD PACKAGE
SN74ABT16245A . . . DGG, DGV, OR DL PACKAGE
(TOP VIEW)
1DIR 1
1B1 2
1B2 3
GND 4
1B3 5
1B4 6
V_CC 7
1B5 8
1B6 9
GND 10
1B7 11
1B8 12
2B1 13
2B2 14
GND 15
2B3 16
2B4 17
V_CC 18
2B5 19
2B6 20
GND 21
2B7 22
2B8 23
2DIR 24
48 1OE
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CC
41 1A5
40 1A6
39 GND
38 1A7
37 1A8
36 2A1
35 2A2
34 GND
33 2A3
32 2A4
31 V_CC
30 2A5
29 2A6
28 GND
27 2A7
26 2A8
25 2OE
DESCRIPTION
The 'ABT16245A devices are 16-bit noninverting 3-state transceivers designed for synchronous two-way
communication between data buses. The control-function implementation minimizes external timing
requirements.
These devices can be used as two 8-bit transceviers or one 16-bit transceiver. They allow data transmission from
the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
When V_CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impendance state above 2.1 V, OE should be tied to V_CC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT16245A is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABT16245A is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus, EPIC-IIB are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1994–2006, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.