SLVA339A Datasheet, PDF (1/9 Pages) Texas Instruments – High-Vin, High-Efficiency Power Solution Using DC/DC Converter With DVFS

Application Report
SLVA339A – June 2009 – Revised May 2010
High-Vin, High-Efficiency Power Solution Using DC/DC
Converter With DVFS
Ambreesh Tripathi .......................................................................... PMP - DC/DC Low-Power Converters
ABSTRACT
This reference design is intended for users designing with the TMS320C6742, TMS320C6746,
TMS320C6748, or OMAP-L138 processor. Using sequenced power supplies, this reference design
describes a system having a 12-V input voltage and a high-efficiency dc/dc converter with integrated FETs
and dynamic voltage and frequency scaling (DVFS) for a small, simple design.
Sequenced power supply architectures are becoming commonplace in high-performance microprocessor
and digital signal processor (DSP) systems. To save power and increase processing speeds, processor
cores have smaller geometry cells and require lower supply voltages than the system bus voltages. Power
management in these systems requires special attention. This application report addresses these topics
and suggests solutions for output voltage sequencing.
Contents
1 Introduction .................................................................................................................. 2
2 Power Requirements ....................................................................................................... 2
3 Features ...................................................................................................................... 3
4 Bill of Materials .............................................................................................................. 6
List of Figures
1 PMP4976 Reference Design Schematic................................................................................. 4
2 Optional Circuit for DVDD_A, DVDD_B, and DVDD_C................................................................ 5
3 Sequencing in Start-up Waveform........................................................................................ 7
4 Efficiency vs Output Current............................................................................................... 7
5 Efficiency vs Output Current............................................................................................... 7
6 Efficiency vs Output Current............................................................................................... 7
7 Efficiency vs Output Current............................................................................................... 7
List of Tables
1 General Requirements ..................................................................................................... 2
2 PMP4976 Bill of Materials ................................................................................................. 6
SLVA339A – June 2009 – Revised May 2010
High-Vin, High-Efficiency Power Solution Using DC/DC Converters With DVFS
1
Copyright © 2009–2010, Texas Instruments Incorporated