RI-TRP-RR2B Datasheet, PDF (1/1 Pages) Texas Instruments – 32mm Glass Transponder

RADIO FREQUENCY IDENTIFICATION SYSTEMS
Data Sheet
32mm Glass Transponder
Specifications:
Part number
RI-TRP-RR2B RI-TRP-WR2B RI-TRP-DR2B
RI-TRP-IR2B
Functionality
Memory (Bits)
Memory (Pages)
Operating Frequency
Modulation
Transmission Principle
Power Source
Typical Reading Range
Typical Programming Range
Typical Read Time
Typical Programming Time
Typical Programming Cycles
Operating Temperature (Read)
Operating Temperature (Program)
Storage Temperature
Case Material
Protection Class
EMC
Signal Penetration
Mechanical Shock
Vibration
Dimensions
Weight
Read Only
Read/Write
MPT
SAMPT
64
80*
1360*
1360*
1
1
17*R/W
17*R/W***
134.2 kHz
FSK (Frequency Shift Keying) 134.2 kHz / 123.2 kHz
HDX (Half Duplex)
Powered from the reader signal (batteryless)
≤ 100 cm**
---
30 % of specified reading range
70 ms
86 ms
---
309 ms
293 ms
341 ms
---
100,000
-25 to +85°C
---
-25 to +70°C
-25 to +85°C
-40 to +100°C (+125°C for total 1000 hours)
Glass
Hermetically sealed
Programmed code is not affected by normal electromagnetic interference or x-rays
Transponder can be read through virtually all non-metallic material
IEC 68-2-27, Test Ea; 300 g, half sine, 3 ms, 2 axes
IEC 68-2-6, Test Fc; 3 g, 5 - 50 Hz, 2 axes, 24 hours per axis
20 g, 10 - 2000 Hz, 2 axes, 2.5 hours per axis
∅ 3.85 ± 0.05 mm * 31.2 ± 0.6 mm
∅ 3.85 ± 0.05 mm * 32.2 ± 0.6 mm
0.8 g
* We recommend that you split each 80 bit page into 64 user programmable bits plus a 16 bit wide CRC CCITT Block Check Character as is done
by TI-RFID readers.
** Depending on RF regulation in country of use, the Reader Antenna configuration used, and the environmental conditions.
*** 24 bits Selective Address width.
For more information, contact the sales office or distributor nearest you. This contact information can be found
on our web site at:
http://www.ti-rfid.com
Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various
technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no
responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance
provided by TI.
© Copyright 2001 Texas Instruments Incorporated.
Data Sheet: 11-09-22-081 09/01