RI-STU-TRDC-02 Datasheet, PDF (1/1 Pages) Texas Instruments – HF Reader System Series 6000 S6350 Midrange Reader Module

Data Sheet
RADIO FREQUENCY IDENTIFICATION SYSTEMS
HF Reader System Series 6000
S6350 Midrange Reader Module
Specifications:
Part Number
Operating Frequency
Supported Transponders
Supply Voltage
Power Consumption
Transmitter Power
Transmitter Modulation
Data Coding Mode
Input/Output
Antenna Connection
Antenna Impedance
Antenna Q, Loaded
Communication Interface
Communication Parameters
Communication Protocol
Memory
Synchronization
Operating Temperature
Storage Temperature
Vibration
Dimensions
Weight
RI-STU-TRDC-02
13.56 MHz ± 7 kHz
Tag-it HF, Tag-it HF-I & ISO 15693 compliant transponders
5 VDC ± .5VDC
1250 mW Maximum
120 mW into 50 (Typical)
AM 10% - 30% (set at 20% nominal) or 100% - Software
Selectable
1 / 4 or 1 / 256
16-pin Header Connector
2 pins of 16-pin Header Connector
50 ± 5 @ 13.56MHz
10 < Q < 30
RS232 (via 16-pin Header Connector)
57.6 K-baud, 8 data bits, 1 start bit, 1 stop bit & no parity
Tag-it & ISO Host protocol
Flash for downloadable firmware updates
Protocol synchronization via I/O
-20°C to +70°C
-40°C to +85°C
15 Hz to 500 Hz, 1g peak, 30 minutes sweep, logarithmic
(MIL-STD-810E, Method 514.4)
4.3” x 2.7” x 0.4”
109.22mm x 68.58mm x 10.2mm (metric)
1.09 oz (31 grams)
For more information, contact the sales office or distributor nearest you. This contact information can be found
on our web site at:
http://www.ti-rfid.com
Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various technical
areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no responsibility for
customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by TI.
© Copyright 2001 Texas Instruments Incorporated.
Data Sh eet: 11-06-22-706 10/01