RI-I11-114A-01_11 Datasheet, PDF (1/5 Pages) Texas Instruments – Tag-it™ HF-I STANDARD TRANSPONDER INLAYS SQUARE

www.ti.com
RI-I11-114A-01
RI-I11-114B-01
SCBS828B – DECEMBER 2005 – REVISED SEPTEMBER 2011
Tag-it™ HF-I STANDARD TRANSPONDER INLAYS
SQUARE
Check for Samples: RI-I11-114A-01, RI-I11-114B-01
FEATURES
1
•2 ISO/IEC 15693-2, -3; ISO/IEC 18000-3
Compliant
• 13.56-MHz Operating Frequency
• 256-Bit User Memory in 8-Bit × 32-Bit Blocks
• Application Family Identifier (AFI)
• Fast Simultaneous Identification
(Anti-Collision)
APPLICATIONS
• Product Authentication
• Library
• Supply-Chain Management
• Asset Management
• Ticketing/Stored Value
DESCRIPTION
Texas Instruments Tag-it™ HF-I standard transponder inlays consist of 13.56-MHz high-frequency (HF)
transponders that are compliant with the ISO/IEC 15693 and ISO/IEC 18000-3 global open standards. These
products offer a user-accessible memory of 256 bits, organized in eight blocks, and an optimized command set
available in five different antenna shapes, with frequency offset for integration into paper, PVC, or other
substrates.
The Tag-it HF-I standard transponder inlays are manufactured with TI’s patented laser tuning process to provide
consistent read performance. Prior to delivery, the transponders undergo complete functional and parametric
testing, in order to provide the high quality that customers have come to expect from TI.
The Tag-it HF-I standard transponder inlays are well suited for a variety of applications including, but not limited
to, product authentication, library, supply-chain management, asset management, and ticketing/stored value
applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Tag-it is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2011, Texas Instruments Incorporated