RI-I02-114A-01 Datasheet, PDF (1/3 Pages) Texas Instruments – Tag-it™ HF-I STANDARD TRANSPONDER INLAYS LARGE RECTANGLE

RI-I02-114A-01, RI-I02-114B-01
www.ti.com
Tag-it™ HF-I STANDARD TRANSPONDER INLAYS
LARGE RECTANGLE
SCBS820 – DECEMBER 2005
FEATURES
• ISO/IEC 15693-2, -3; ISO/IEC 18000-3
Compliant
• 13.56-MHz Operating Frequency
• 256-Bit User Memory in 8-Bit × 32-Bit Blocks
• Application Family Identifier (AFI)
• Fast Simultaneous Identification
(Anti-Collision)
APPLICATIONS
• Product Authentication
• Library
• Supply-Chain Management
• Asset Management
• Ticketing/Stored Value
DESCRIPTION
Texas Instruments Tag-it™ HF-I standard transponder inlays consist of 13.56-MHz high-frequency (HF)
transponders that are compliant with the ISO/IEC 15693 and ISO/IEC 18000-3 global open standards. These
products offer a user-accessible memory of 256 bits, organized in eight blocks, and an optimized command set
available in five different antenna shapes, with frequency offset for integration into paper, PVC, or other
substrates.
SPECIFICATIONS ⁽¹⁾
Supported standard
Recommended operating frequency
Passive resonance frequency (at 25°C)
Typical required activation field strength to read (at 25°C)
Typical required activation field strength to write (at 25°C)
Factory-programmed read-only number
Memory (user programmable)
Typical programming cycles (at 25°C)
Data retention time (at 55°C)
Simultaneous identification of tags
Antenna size
Foil width
Foil pitch
Base material
Operating temperature
Storage temperature (single inlay)
Storage temperature (on reel)
PART NUMBER
RI-I02-114A-01
RI-I02-114B-01
ISO/IEC 15693-2, -3; ISO/IEC 18000-3
13.56 MHz
13.86 MHz ± 200 kHz
(includes frequency offset to
compensate further integration into
paper)
14.4 MHz ± 200 kHz
(includes frequency offset to
compensate PVC lamination)
94 dBµA/m⁽²⁾
94 dBµA/m⁽³⁾
97 dBµA/m⁽²⁾
97 dBµA/m⁽³⁾
64 bits
256 bits organized in 8-bit × 32-bit blocks
100,000
>10 years
Up to 50 tags per second (reader/antenna dependent)
45 mm × 76 mm (~1.77 in × ~2.99 in)
48 mm ± 0.5 mm (1.89 in ± 0.02 in)
96 mm +0.1 mm/–0.4 mm (3.78 in)
Substrate: PET (polyethylenetherephtalate); Antenna: aluminum
–25°C to 70°C
–40°C to 85°C (warpage may occur at upper temperature range)
–40°C to 40°C
(1) For highest possible read-out coverage, operate readers at a modulation depth of 20% or higher.
(2) After integration into paper
(3) After PVC lamination
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Tag-it is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated