RI-I01-110A Datasheet, PDF (1/1 Pages) Texas Instruments – Tag-it HF Transponder Inlay Square

RADIO FREQUENCY IDENTIFICATION SYSTEMS
Data Sheet
Tag-it^ HF
Transponder Inlay
Square
Specifications:
Part Number
Recommended Operating frequency
Passive Resonance Frequency (at +25°C)
Typical activation field strength read (at +25°C)
Typical activation field strength write (at +25°C)
Factory programmed Read Only Number
Memory (user programmable)
Typical programming cycles (at +25°C)
Data retention time (at +55°C)
Simultaneous Identification of Tags
Uplink / downlink data rates
RX modulation
TX frequencies
Antenna size
Foil width
Foil pitch
Thickness
Base material
Smallest bending radius allowed
Operating temperature
Storage temperature (single inlay)
Storage temperature (on reel)
Delivery
Typical quantity per reel
RI-I01-110A
RI-I11-110A
13.56 MHz
14.36 MHz ± 200kHz (includes frequency offset to compensate further
integration into paper; drops down to operating frequency when exposed
to activation field strength)
103 dBµA/m
108 dBµA/m
32 bits
256 bits organized in 8 x 32-bit blocks
100,000
> 10 years
Up to 50 tags per second (reader/antenna dependant)
26.7 kBd / 6.2 and 9 kBd
Pulse-width coded, AM 100% modulation
Manchester encoded, A = fc ± 423.75 kHz, B = fc ± 484.29 kHz
Low bit: transition A to B. High bit: transition B to A
45 mm x 45 mm (∼1.77 in x ∼1.77 in)
48 mm ± 0.5 mm (1.89 in ± 0.02 in)
48 mm +0.1mm/-0.4mm (∼1.89 in) 50.8 mm +0.1mm/-0.4mm (2 in)
Chip: 0.355mm (∼0.014 in)
Antenna: 0.085mm (∼0.0033 in)
Substrate: PET (Polyethylenetherephtalate)
Antenna: Aluminum
18 mm (∼0.71 in)
-25°C to +70°C
-40°C to +85°C (warpage may occur with increasing temperature)
-40°C to +40°C
Single row tape wound on cardboard reel with 500 mm diameter
Reel width: approx. 60 mm (∼2.36 in); inside 50 mm (∼1.97 in)
Hub diameter: 76.2 mm (3 in)
5,000
For more information, contact the sales office or distributor nearest you. This contact information can be found
on our web site at:
http://www.ti-rfid.com
Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various
technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no
responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance
provided by TI.
© Copyright 2001 Texas Instruments Incorporated.
11-09-22-089 03/01