OPA692IDBVTG4 Datasheet, PDF (1/30 Pages) Texas Instruments – Wideband, Fixed Gain Video BUFFER AMPLIFIER With Disable

www.ti.com
OPA692
OPA692
OPA692
SBOS236E – MARCH 2002 – REVISED DECEMBER 2008
Wideband, Fixed Gain
Video BUFFER AMPLIFIER With Disable
FEATURES
q FLEXIBLE SUPPLY RANGE:
+5V to +12V Single Supply
±2.5V to ±6V Dual Supplies
q INTERNALLY FIXED GAIN: +2 or ±1
q HIGH BANDWIDTH (G = +2): 225MHz
q LOW SUPPLY CURRENT: 5.1mA
q LOW DISABLED CURRENT: 150µA
q HIGH OUTPUT CURRENT: 190mA
q OUTPUT VOLTAGE SWING: ±4.0V
q SOT23-6 AVAILABLE
APPLICATIONS
q BROADBAND VIDEO LINE DRIVERS
q MULTIPLE LINE VIDEO DA
q PORTABLE INSTRUMENTS
q ADC BUFFERS
q ACTIVE FILTERS
OPA692 RELATED PRODUCTS
Voltage-Feedback
Current-Feedback
Fixed Gain
SINGLES
OPA690
OPA691
OPA682
DUALS
OPA2690
OPA2691
OPA2682
TRIPLES
OPA3690
OPA3691
OPA3692
Video
In
1
2
3
75Ω ^–5V
4
DESCRIPTION
The OPA692 provides an easy to use, broadband fixed gain
video buffer amplifier. Depending on the external connec-
tions, the internal resistor network may be used to provide
either a fixed gain of +2 video buffer or a gain of +1 or –1
voltage buffer. Operating on a very low 5.1mA supply cur-
rent, the OPA692 offers a slew rate and output power
normally associated with a much higher supply current. A
new output stage architecture delivers high output current
with minimal headroom and crossover distortion. This gives
exceptional single-supply operation. Using a single +5V
supply, the OPA692 can deliver a 1V to 4V output swing with
over 120mA drive current and > 200MHz bandwidth. This
combination of features makes the OPA692 an ideal RGB
line driver or single-supply Analog-to-Digital Converter (ADC)
input driver.
The low 5.1mA supply current for the OPA692 is precisely
trimmed at +25°C. This trim, along with low drift over tem-
perature, ensures a lower maximum supply current than
competing products that report only a room temperature
nominal supply current. System power may be further re-
duced by using the optional disable control pin. Leaving this
disable pin open, or holding it HIGH, gives normal operation.
If pulled LOW, the OPA692 supply current drops to less than
150µA while the I/O pins go into a high-impedance state.
OPA692
SO-8
G = +2
8 DIS
7
+5V
6
5
75Ω
RG-59
75Ω
RG-59
75Ω
RG-59
75Ω
Video
Out
75Ω
75Ω
75Ω
RG-59
75Ω
225MHz, 4-Output Component Video DA
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 2002-2008, Texas Instruments Incorporated