OPA564_15 Datasheet, PDF (1/37 Pages) Texas Instruments – 1.5A, 24V, 17MHz POWER OPERATIONAL AMPLIFIER

OPA564
www.ti.com
SBOS372E – OCTOBER 2008 – REVISED JANUARY 2011
1.5A, 24V, 17MHz
POWER OPERATIONAL AMPLIFIER
Check for Samples: OPA564
FEATURES
1
•23 HIGH OUTPUT CURRENT: 1.5A
• WIDE POWER-SUPPLY RANGE:
– Single Supply: +7V to +24V
– Dual Supply: ±3.5V to ±12V
• LARGE OUTPUT SWING: 20V_PP at 1.5A
• FULLY PROTECTED:
– THERMAL SHUTDOWN
– ADJUSTABLE CURRENT LIMIT
• DIAGNOSTIC FLAGS:
– OVER-CURRENT
– THERMAL SHUTDOWN
• OUTPUT ENABLE/SHUTDOWN CONTROL
• HIGH SPEED:
– GAIN-BANDWIDTH PRODUCT: 17MHz
– FULL-POWER BANDWIDTH AT 10V_PP:
1.3MHz
– SLEW RATE: 40V/ms
• DIODE FOR JUNCTION TEMPERATURE
MONITORING
• HSOP-20 PowerPAD™ PACKAGE
(Bottom- and Top-Side Thermal Pad Versions)
APPLICATIONS
• POWERLINE COMMUNICATIONS
• VALVE, ACTUATOR DRIVER
• V_COM DRIVER
• MOTOR DRIVER
• AUDIO POWER AMPLIFIER
• POWER-SUPPLY OUTPUT AMPLIFIER
• TEST EQUIPMENT AMPLIFIER
• TRANSDUCER EXCITATION
• LASER DIODE DRIVER
• GENERAL-PURPOSE LINEAR POWER
BOOSTER
DESCRIPTION
The OPA564 is a low-cost, high-current operational
amplifier that is ideal for driving up to 1.5A into
reactive loads. The high slew rate provides 1.3MHz
full-power bandwidth and excellent linearity. These
monolithic integrated circuits provide high reliability in
demanding powerline communications and motor
control applications.
The OPA564 operates from a single supply of 7V to
24V, or dual power supplies of ±3.5V to ±12V. In
single-supply operation, the input common-mode
range extends to the negative supply. At maximum
output current, a wide output swing provides a 20V_PP
(I_OUT = 1.5A) capability with a nominal 24V supply.
The OPA564 is internally protected against
over-temperature conditions and current overloads. It
is designed to provide an accurate, user-selected
current limit. Two flag outputs are provided; one
indicates current limit and the second shows a
thermal over-temperature condition. It also has an
Enable/Shutdown pin that can be forced low to shut
down the output, effectively disconnecting the load.
The OPA564 is housed in a thermally-enhanced,
surface-mount PowerPAD™ package (HSOP-20) with
the choice of the thermal pad on either the top side or
the bottom side of the package. Operation for both
versions is specified over the industrial temperature
range, –40°C to +85°C.
OPA564 RELATED PRODUCTS
FEATURES
DEVICE
Zerø-Drift PGA with 2-Channel Input
Mux and SPI
PGA112
Zerø-Drift Operational Amplifier,
50MHz, RRI/O, Single-Supply
OPA365
Quad Operational Amplifier, JFET
Input , Low Noise
TL074
Power Operational Amplifier, 1.2A,
15V, 17MHz, 50V/ms
OPA561
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments, Inc.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
© 2008–2011, Texas Instruments Incorporated