OPA364IDBVRG4 Datasheet, PDF (1/38 Pages) Texas Instruments – 1.8V, 7MHz, 90dB CMRR, Single-Supply, Rail-to-Rail I/O Operational Amplifier

OPA363, OPA2363
OPA364, OPA2364, OPA4364
www.ti.com
SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013
1.8V, 7MHz, 90dB CMRR,
Single-Supply, Rail-to-Rail I/O
Operational Amplifier
Check for Samples: OPA363, OPA2363, OPA364, OPA2364, OPA4364
FEATURES
1
•2 1.8V Operation
• MicroSize Packages
• Bandwidth: 7MHz
• CMRR: 90dB (typical)
• Slew Rate: 5V/μs
• Low Offset: 500μV (max)
• Quiescent Current: 750μA/Channel (max)
• Shutdown Mode: < 1µA/Channel
APPLICATIONS
• Signal Conditioning
• Data Acquisition
• Process Control
• Active Filters
• Test Equipment
SOT23-5
SOT23-6
MSOP-8
MSOP-10
SO-8
TSSOP-14
SO-14
UQFN-16
OPA363
X
X
OPA364 OPA2363 OPA2364 OPA4364
X
X
X
X
X
X
X
X
DESCRIPTION
The OPA363 and OPA364 families are high-
performance CMOS operational amplifiers optimized
for very low voltage, single-supply operation. These
miniature, low-cost amplifiers are designed to operate
on single supplies from 1.8V (±0.9V) to 5.5V
(±2.75V). Applications include sensor amplification
and signal conditioning in battery-powered systems.
The OPA363 and OPA364 families offer excellent
CMRR without the crossover associated with
traditional complimentary input stages. This results in
excellent performance for driving Analog-to-Digital
(A/D) converters without degradation of differential
linearity and THD. The input commonmode range
includes both the negative and positive supplies. The
output voltage swing is within 10mV of the rails.
The OPA363 family includes a shutdown mode.
Under logic control, the amplifiers can be switched
from normal operation to a standby current that is
less than 1μA.
The single version is available in the MicroSize
SOT23-5 (SOT23-6 for shutdown) and SO-8. The
dual version is available in MSOP-8, MSOP-10,
UQFN-16. and SO-8 packages. Quad packages are
available in TSSOP-14 and SO-14 packages. All
versions are specified for operation from –40°C to
+125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated