MSP430X11X Datasheet, PDF (1/31 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLERS

MSP430x11x
MIXED SIGNAL MICROCONTROLLERS
D Low Supply Voltage Range 2.5 V to 5.5 V
D Ultralow-Power Consumption:
− Active Mode: 330 µA at 1 MHz, 3 V
− Standby Mode: 1.5 µA
− Off Mode (RAM Retention): 0.1 µA
D Wake-up From Standby Mode in less
than 6 µs
D 16-Bit RISC Architecture, 200 ns Instruction
Cycle Time
D Basic Clock Module Configurations:
− Various Internal Resistors
− Single External Resistor
− 32 kHz Crystal
− High Frequency Crystal
− Resonator
− External Clock Source
D 16-Bit Timer_A With Three
Capture/Compare Registers
SLAS196D− DECEMBER 1998 − REVISED SEPTEMBER 2004
D Serial Onboard Programming
D Program Code Protection by Security Fuse
D Family Members Include:
MSP430C111: 2k Byte ROM, 128 Byte RAM
MSP430C112: 4k Byte ROM, 256 Byte RAM
MSP430P112: 4k Byte OTP, 256 Byte RAM
D EPROM Version Available for Prototyping:
− PMS430E112: 4k Byte EPROM, 256 Byte
RAM
D Available in a 20-Pin Plastic Small-Outline
Wide Body (SOWB) Package, 20-Pin
Ceramic Dual-In-Line (CDIP) Package
(EPROM Only)
D For Complete Module Descriptions, Refer
to the MSP430x1xx Family User’s Guide,
Literature Number SLAU049
description
The Texas Instruments MSP430 family of ultralow
power microcontrollers consist of several devices
featuring different sets of peripherals targeted for
various applications. The architecture, combined
with five low power modes is optimized to achieve
extended battery life in portable measurement
applications. The device features a powerful
16-bit RISC CPU, 16-bit registers, and constant
generators that attribute to maximum code
efficiency. The digitally controlled oscillator (DCO)
allows wake-up from low-power modes to active
mode in less than 6µs.
TEST/VPP
V_CC
P2.5/R_OSC
V_SS
XOUT/TCLK
XIN
RST/NMI
P2.0/ACLK
P2.1/INCLK
P2.2/TA0
DW PACKAGE
(TOP VIEW)
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
P1.7/TA2/TDO/TDI
P1.6/TA1/TDI
P1.5/TA0/TMS
P1.4/SMCLK/TCK
P1.3/TA2
P1.2/TA1
P1.1/TA0
P1.0/TACLK
P2.4/TA2
P2.3/TA1
The MSP430x11x series is an ultra low-power mixed signal microcontroller with a built in 16-bit timer and
fourteen I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then
process the data and display them or transmit them to a host system. Stand alone RF sensor front-end is another
area of application.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1998 − 2004, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1