MSP430F5132 Datasheet, PDF (1/103 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F51x1
MSP430F51x2
www.ti.com
SLAS619I – AUGUST 2010 – REVISED FEBRUARY 2013
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
•23 Low Supply Voltage Range:
3.6 V Down to 1.8 V
• Ultralow Power Consumption
– Active Mode (AM): 180 µA/MHz
– Standby Mode (LPM3 WDT Mode, 3 V):
1.1 µA
– Off Mode (LPM4 RAM Retention, 3 V):
0.9 µA
– Shutdown Mode (LPM4.5, 3 V): 0.25 µA
• Wake-Up From Standby Mode in Less Than
5 µs
• 16-Bit RISC Architecture, Extended Memory,
40-ns Instruction Cycle Time
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals (XT1)
– High-Frequency Crystals up to 25 MHz
(XT1)
• Hardware Multiplier Supporting 32-Bit
Operations
• Three Channel DMA
• Up to Twelve 5-V Tolerant Digital Push/Pull
I/Os With Up to 20-mA Drive Strength⁽¹⁾
• 16-Bit Timer TD0 With Three Capture/Compare
Registers and Support of High-Resolution
Mode
• 16-Bit Timer TD1 With Three Capture/Compare
Registers and Support of High-Resolution
Mode
• 16-Bit Timer TA0 With Three Capture/Compare
Registers
• Universal Serial Communication Interfaces⁽¹⁾
– USCI_A0 Supporting
– Enhanced UART Supporting Auto-
Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 Supporting
– I²C™
– Synchronous SPI
• 10-Bit 200-ksps Analog-to-Digital (A/D)
Converter
– Internal Reference
– Sample-and-Hold
– Autoscan Feature
– Up to Eight External Channels, Two Internal
Channels, Including Temperature Sensor⁽¹⁾
• Up to 16-Channel On-Chip Comparator
Including an Ultralow-Power Mode⁽¹⁾
• Serial Onboard Programming, No External
Programming Voltage Needed
• Family Members are Summarized in Table 1
• Available in 40-Pin QFN (RSB) and 38-Pin
TSSOP (DA) Packages (See Table 2)
• For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208) ⁽¹⁾
(1) Full functionality in the 40-pin QFN package options. For the
available features of other packages see Terminal Functions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430 is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated