MSP430C33X_08 Datasheet, PDF (1/41 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLERS

MSP430C33x, MSP430P337A
MIXED SIGNAL MICROCONTROLLERS
D Low Supply Voltage Range 2.5 V – 5.5 V
D Low Operation Current, 400 mA at 1 MHz,
3V
D Ultralow-Power Consumption:
– Standby Mode: 2 µA
– RAM Retention Off Mode: 0.1 µA
D Five Power-Saving Modes
D Wake-Up From Standby Mode in 6 µs
D 16-Bit RISC Architecture, 300 ns Instruction
Cycle Time
D Single Common 32 kHz Crystal, Internal
System Clock up to 3.8 MHz
D Integrated LCD Driver for up to 120
Segments
D Integrated Hardware Multiplier Performs
Signed, Unsigned on Multiply, and MAC
Operations for Operands up to 16 × 16 Bits
D Serial Communication Interface (USART),
Select Asynchronous UART or
Synchronous SPI by Software
SLAS227A – OCTOBER 1999 – REVISED JUNE 2000
D Slope A/D Converter Using External
Components
D 16-Bit Timer With Five Capture/Compare
Registers
D Serial Onboard Programming
D Programmable Code Protection by Security
Fuse
D Family Members Include:
– MSP430C336 – 24 KB ROM, 1 KB RAM
– MSP430C337 – 32 KB ROM, 1 KB RAM
– MSP430P337A – 32 KB OTP, 1 KB RAM
D EPROM Version Available for Prototyping:
– PMS430E337A
D Available in the Following Packages:
– 100 Pin Quad Flat-Pack (QFP)
– 100 Pin Ceramic Quad Flat-Pack (CFP)
(EPROM Version)
description
The Texas Instruments MSP430 is an ultralow-power mixed signal microcontroller family consisting of several
devices featuring different sets of modules targeted to various applications. The controller is designed to be
battery-operated for an extended application lifetime. With the 16-bit RISC architecture, 16 integrated registers
on the CPU, and a constant generator, the MSP430 achieves maximum code efficiency. The digital-controlled
oscillator, together with the frequency lock loop (FLL), provides a wake-up from a low-power mode to an active
mode in less than 6 ms. The MSP430x33x series microcontrollers have built-in hardware multiplication and
communication capability using asynchronous (UART) and synchronous protocols.
Typical applications of the MSP430 family include electronic gas, water, and electric meters and other sensor
systems that capture analog signals, convert them to digital values, process, displays, or transmits data to a
host system.
TA
– 40°C to 85°C
25°C
AVAILABLE OPTIONS
PACKAGED DEVICES
PLASTIC QFP
(PJM)
CERAMIC QFP
(HFD)
MSP430C336IPJM
MSP430C337IPJM
—
MSP430P337AIPJM
—
PMS430E337AHFD
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1