MC33078-EP_15 Datasheet, PDF (1/21 Pages) Texas Instruments – DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER

www.ti.com
MC33078-EP
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLOS495 – OCTOBER 2006
FEATURES
• Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
• Enhanced Diminishing Manufacturing Sources
(DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree ⁽¹⁾
• Dual-Supply Operation . . . ±5 V to ±18 V
• Low Noise Voltage . . . 4.5 nV/√Hz
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
• Low Input Offset Voltage . . . 0.15 mV
• Low Total Harmonic Distortion . . . 0.002%
• High Slew Rate . . . 7 V/µs
• High-Gain Bandwidth Product . . . 16 MHz
• High Open-Loop AC Gain . . . 800 at 20 kHz
• Large Output-Voltage Swing . . . 14.1 V to
–14.6 V
• Excellent Gain and Phase Margins
D PACKAGE
(TOP VIEW)
OUT1 1
IN1− 2
IN1+ 3
V_{CC −} 4
8 V_CC+
7 OUT2
6 IN2−
5 IN2+
DESCRIPTION/ORDERING INFORMATION
The MC33078-EP is a bipolar dual operational amplifier with high-performance specifications for use in quality
audio and data-signal applications. This device operates over a wide range of single- and dual-supply voltages
and offers low noise, high-gain bandwidth, and high slew rate. Additional features include low total harmonic
distortion, excellent phase and gain margins, large output voltage swing with no deadband crossover distortion,
and symmetrical sink/source performance.
T_A
–55°C to 125°C SOIC – D
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
Reel of 2500
MC33078MDREP
TOP-SIDE MARKING
33078M
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
SYMBOL (EACH AMPLIFIER)
IN+
+
IN −
−
OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated