MAX3222 Datasheet, PDF (1/14 Pages) Maxim Integrated Products – 3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1uF External Capacitors

ą
MAX3222
3ĆV TO 5.5ĆV MULTICHANNEL RSĆ232 LINE DRIVER/RECEIVER
WITH ±15ĆkV ESD PROTECTION
SLLS408G − JANUARY 2000 − REVISED MARCH 2004
D RS-232 Bus-Pin ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
D Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU v.28 Standards
D Operates With 3-V to 5.5-V V_CC Supply
D Operates Up To 250 kbit/s
D Two Drivers and Two Receivers
D Low Standby Current . . . 1 µA Typical
D External Capacitors . . . 4 × 0.1 µF
D Accepts 5-V Logic Input With 3.3-V Supply
D Alternative High-Speed Pin-Compatible
Device (1 Mbit/s)
− SNx5C3222
D Applications
− Battery-Powered Systems, PDAs,
Notebooks, Laptops, Palmtop PCs, and
Hand-Held Equipment
DB, DW, OR PW PACKAGE
(TOP VIEW)
EN 1
C1+ 2
V+ 3
C1− 4
C2+ 5
C2− 6
V− 7
DOUT2 ⁸
RIN2 ⁹
ROUT2 ¹⁰
20 PWRDOWN
19 V_CC
18 GND
17 DOUT1
16 RIN1
15 ROUT1
14 NC
13 _DIN1
12 _DIN2
11 _NC
NC − No internal connection
description/ordering information
The MAX3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with
±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the
requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication
controller and the serial-port connector. The charge pump and four small external capacitors allow operation
from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum
of 30-V/µs driver output slew rate.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SOIC (DW)
Tube of 25
Reel of 2000
MAX3222CDW
MAX3222CDWR
MAX3222C
−0°C to 70°C
SSOP (DB)
Tube of 70
Reel of 2000
MAX3222CDB
MAX3222CDBR
MA3222C
TSSOP (PW)
Tube of 70
Reel of 2000
MAX3222CPW
MAX3222CPWR
MA3222C
SOIC (DW)
Tube of 25
Reel of 2000
MAX3222IDW
MAX3222IDWR
MAX3222I
−40°C to 85°C SSOP (DB)
Tube of 70
Reel of 2000
MAX3222IDB
MAX3222IDBR
MB3222I
TSSOP (PW)
Tube of 70
Reel of 2000
MAX3222IPW
MAX3222IPWR
MB3222I
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1