MAX211_06 Datasheet, PDF (1/17 Pages) Texas Instruments – 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH +-15-KV ESD PROTECTION

MAX211
5ĆV MULTICHANNEL RSĆ232 LINE DRIVER/RECEIVER
WITH ±15ĆkV ESD PROTECTION
SLLS567E − MAY 2003 − REVISED JANUARY 2004
D RS-232 Bus-Pin ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
D Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU v.28 Standards
D Operates at 5-V V_CC Supply
D Four Drivers and Five Receivers
D Operates Up To 120 kbit/s
D Low Supply Current in Shutdown
Mode . . . 1 µA Typical
D External Capacitors . . . 4 × 0.1 µF
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D Applications
− Battery-Powered Systems, PDAs,
Notebooks, Laptops, Palmtop PCs, and
Hand-Held Equipment
DB OR DW PACKAGE
(TOP VIEW)
DOUT3 1
DOUT1 2
DOUT2 3
RIN2 ⁴
ROUT2 ⁵
DIN2 ⁶
DIN1 ⁷
ROUT1 ⁸
RIN1 ⁹
GND ¹⁰
V_CC ¹¹
C1+ ¹²
V+ ¹³
C1− ¹⁴
28 DOUT4
27 RIN3
26 ROUT3
25 _SHDN
24 _EN
23 _RIN4
22 _ROUT4
21 _DIN4
20 _DIN3
19 _ROUT5
18 _RIN5
17 _V−
16 _C2−
15 _C2+
description/ordering information
The MAX211 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with
±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the
requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication
controller and the serial-port connector. The charge pump and four small external capacitors allow operation
from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs
driver output slew rate.
The MAX211 has both shutdown (SHDN) and enable control (EN). In shutdown mode, the charge pumps are
turned off, V+ is pulled down to V_CC, V− is pulled to GND, and the transmitter outputs are disabled. This
reduces supply current typically to 1 µA. EN is used to put the receiver outputs into the high-impedance state
to allow wired-OR connection of two RS-232 ports. It has no effect on the RS-232 drivers or the charge pumps.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
0°C to 70°C
SOIC (DW)
SSOP (DB)
Tube of 20
Reel of 1000
Tube of 50
Reel of 2000
MAX211CDW
MAX211CDWR
MAX211CDB
MAX211CDBR
MAX211C
MAX211C
−40°C to 85°C
SOIC (DW)
SSOP (DB)
Tube of 20
Reel of 1000
Tube of 50
Reel of 2000
MAX211IDW
MAX211IDWR
MAX211IDB
MAX211IDBR
MAX211I
MAX211I
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1