LP3999_15 Datasheet, PDF (1/19 Pages) Texas Instruments – LP3999 Low Noise 150mA Voltage Regulator for RF/Analog Applications

LP3999
www.ti.com
SNVS207E – JUNE 2003 – REVISED MAY 2013
LP3999 Low Noise 150mA Voltage Regulator for RF/Analog Applications
Check for Samples: LP3999
FEATURES
1
•2 5 pin DSBGA Package
• Stable with Ceramic Capacitor
• Logic Controlled Enable
• Fast Turn-on
• Thermal-overload and short-circuit protection
• −40 to +125°C junction temperature range for
operation
KEY SPECIFICATIONS
• 2.5V to 6.0V Input Range
• Accurate Output Voltage; ±75mV / 2%
• 60 mV Typical Dropout with 150 mA Load. V_out
> 2.5V
• Virtually Zero Quiescent Current when
Disabled
• 10 μVrms Output Noise Over 10Hz to 100kHz
• Stable with a 1 μF Output Capacitor
• Ensured 150 mA Output Current
• Fast Turn-on Time; 140 μs (Typ.)
APPLICATIONS
• GSM Portable Phones
• CDMA Cellular Handsets
• Wideband CDMA Cellular Handsets
• Bluetooth Devices
• Portable Information Appliances
• Handheld MP3 Devices
DESCRIPTION
The LP3999 regulator is designed to meet the
requirements of portable wireless battery-powered
applications and will provide an accurate output
voltage with low noise and low quiescent current.
Ideally suited for powering RF/Analog devices this
device will also be used to meet more general circuit
requirements.
For battery powered applications the low dropout and
low ground current provided by the device allows the
lifetime of the battery to be maximized.The inclusion
of an Enable(disable) control can be used by the
system to further extend the battery lifetime by
reducing the power consumption to virtually zero.
Should the application require a device with an active
disable function please refer to device LP3995.
The LP3999 also features internal protection against
short-circuit currents and over-temperature
conditions.
Typical Application Circuit
LP3999
V_IN
C3 _VIN
1.0 PF
C1
V_OUT
Enable Control,
Active high
1.0 uF
A1
V_EN
A3
C_BYPASS
GND
B2
10 nF
Load
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated