|
LP2985-N_15 Datasheet, PDF (1/41 Pages) Texas Instruments – LP2985-N Micropower 150-mA Low-Noise Ultra-Low-Dropout Regulator in SOT-23 and DSBGA Packages Designed for Use with Very Low ESR Output Capacitors | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LP2985-N
SNVS018X â MARCH 2000 â REVISED MAY 2015
LP2985-N Micropower 150-mA Low-Noise Ultra-Low-Dropout Regulator in SOT-23 and
DSBGA Packages Designed for Use with Very Low ESR Output Capacitors
1 Features
â¢1 Input Voltage Range: 2.5 V to 16 V
⢠Ultra Low-Dropout Voltage
⢠Ensured 150 mA Output Current
⢠Smallest Possible Size (SOT-23 and DSBGA 0.5-
mm Pitch Packages)
⢠Requires Minimum External Components
⢠Stable With Low-ESR Output Capacitor
⢠< 1 µA Quiescent Current When Shut Down
⢠Low Ground Pin Current at All Loads
⢠Output Voltage Accuracy 1% (A Grade)
⢠High Peak Current Capability
⢠Low ZOUT: 0.3 ⦠Typical (10 Hz to 1 MHz)
⢠Overtemperature and Overcurrent Protection
⢠â40°C to 125°C Junction Temperature Range
⢠Custom Voltages Available
2 Applications
⢠Cellular Phone
⢠Palmtop and Laptop Computer
⢠Personal Digital Assistant (PDA)
⢠Camcorder, Personal Stereo, Camera
3 Description
The LP2985-N low noise linear regulator delivers up
to 150-mA output current and only requires 300-mV
dropout voltage of input to output. Using an optimized
VIP (Vertically Integrated PNP) process, the LP2985-
N delivers unequaled performance for all battery-
powered designs. The LP2985-N device provides 1%
tolerance precision output voltage with only 75 µA
quiescent current at 1 mA load and 850 µA at 150
mA load. By adding a 10-nF bypass capacitor, the
output noise can be reduced to 30 µVRMS in a 30-kHz
bandwidth.
The LP2985-N is designed to work with a ceramic
output capacitor with equivalent series resistance
(ESR) as low as 5 mâ¦. The devices are available
with fixed output voltage from 2.5 V to 6.1 V. Contact
Texas Instrument Sales for specific voltage option
needs.
The smallest SOT-23 and DSBGA packages are
available for absolute minimum board space.
Device Information(1)
PART NUMBER PACKAGE
BODY SIZE
SOT-23 (5) 2.90 mm x 1.60 mm (NOM)
LP2985-N
DSBGA (5)
1.159 mm x 0.981 mm (MAX)
1.464 mm x 1.095 mm (MAX)
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
VIN
CIN
1 µF
IN
OUT
LP2985
GND
VOUT
COUT
2.2 µF
ON/OFF
ON/OFF BYPASS
CBYPASS
0.01 µF
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |