LMV242_15 Datasheet, PDF (1/25 Pages) Texas Instruments – LMV242 Dual Output, Quad-Band GSM/GPRS Power Amplifier Controller

LMV242
www.ti.com
SNWS014C – APRIL 2004 – REVISED MAY 2013
LMV242 Dual Output, Quad-Band GSM/GPRS Power Amplifier Controller
Check for Samples: LMV242
FEATURES
1
•2 Support of InGaP HBT, Bipolar Technology
• Quad-Band Operation
• Shutdown Mode for Power Save in R_X Slot
• Integrated Ramp Filter
• 50 dB RF Detector
• GPRS Compliant
• External Loop Compensation Option
• Accurate Temperature Compensation
• WSON Package 3x3 mm and Fully Tested Die
Sales
APPLICATIONS
• GSM/GPRS/TDMA/TD_SCDMA Mobile Phone
• Pulse RF Control
• Wireless LAN
• GSM/GPRS Power Amplifier Module
• Transmit Module
DESCRIPTION
The LMV242 is a power amplifier (PA) controller
intended for use within an RF transmit power control
loop in GSM/GPRS mobile phones. The LMV242
supports all single-supply PA’s including InGaP, HBT
and bipolar power amplifiers. The device operates
with a single supply from 2.6V to 5.5V.
Included in the PA controller are an RF detector, a
ramp filter and two selectable output drivers that
function as error amplifiers for two different bands.
The LMV242 input interface consists two analog and
two digital inputs. The analog inputs are the RF input,
Ramp voltage input. The digital inputs perform the
function of “Band Select” and “Shutdown/Transmit
Enable” respectively. The “Band Select” function
enables either of two outputs, namely OUT1 when BS
= High, or output OUT2 when BS = Low. The output
that is not enabled is pulled low to the minimum
output voltage. The LMV242 is active in the case
TX_EN = High. When TX_EN = Low the device is in
a low power consumption shutdown mode. During
shutdown both outputs will be pulled low to the
minimum output voltage. Individual PA characteristics
are accommodated by a user selectable external RC
combination.
The LMV242 is offered in fully tested die form as well
as in a 10-lead WSON package and is therefore
especially suitable for small footprint PA module
solutions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated