LMP92066_15 Datasheet, PDF (1/62 Pages) Texas Instruments – LMP92066 Dual Temperature-Controlled DAC with Integrated EEPROM and Output ON/OFF Control

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LMP92066
SNAS634A – MARCH 2014 – REVISED APRIL 2015
LMP92066 Dual Temperature-Controlled DAC with Integrated EEPROM and Output
ON/OFF Control
1 Features
•1 Internal 12-Bit Temperature Sensor
– Accuracy (–40°C to 120°C), ±3.2°C
(maximum)
• Two Independent Transfer Functions Stored in
EEPROM
• Dual-Analog Output
– Two 12-Bit DACs
– Output Range 0 V to 5 V or 0 V to –5 V
– High-Capacitive Load Tolerant, up to 10 µF
– Post-Calibration Accuracy ±2.4 mV (typical)
• Output On/Off Control Switching Time 50 ns
(typical)
– Switching Time 50 ns (typical)
– RDSON 5 Ω (maximum)
• I²C Interface: Standard and Fast
– Nine Selectable Slave Addresses
– TIMEOUT Function
• VDD Supply Range 4.75 V to 5.25 V
• VIO Range 1.65 V to 3.6 V
• Specified Temperature Range –25°C to 120°C
• Operating Temperature Range –40°C to 125°C
2 Applications
• GaN or LDMOS PA Bias Controller
• Sensor Temperature Compensation
• Timing Circuit Temperature Compensation
3 Description
The LMP92066 is a highly integrated temperature-
controlled dual DAC. Both DACs can be programmed
by two independent, user-defined, temperature-to-
voltage transfer functions stored in the internal
EEPROM, allowing any temperature effects to be
corrected without additional external circuitry. Once
powered up, the device operates autonomously,
without intervention from the system controller, to
provide a complete solution for setting and
compensating bias voltages and currents in control
applications.
The LMP92066 has two analog outputs that support
two output ranges: zero to plus five volts and zero to
minus five volts. Each output can be switched to the
load individually through the use of the dedicated
control pin. The output switching is designed for rapid
response, making the device suitable for the RF
Power Amplifier biasing applications.
The EEPROM is verified for 100 write operations,
enabling repeated field updates. The EEPROM
programming is completed upon the user-issued I²C
command.
The LMP92066’s digital ports interface to a variety of
system controllers, as the dedicated VIO pin sets the
digital I/O levels. The device is available in the
thermally enhanced PowerPAD™ package, enabling
precise PCB temperature measurement.
PART NUMBER
LMP92066
Device Information
PACKAGE
BODY SIZE
HTSSOP (16)
5.00 mm x 4.40 mm
4 Simplified Schematic
3.3V
5V
VIO VDD VDDB
FETDRV1
Gate Bias 1
PA: LDMOS
SDA
SCL
DAC1
10µ
µC
LMP92066
DRVEN1
DRVEN0
A1
FETDRV0
A0
DAC0
GNDD GNDA VSSB
Gate Bias 0
10µ
PA: LDMOS
Residual Error After One Point Calibration
35
MEAN = 0.72 mV
30
STDEV = 1.71 mV
25
20
15
10
5
0
REAOPC (mV)
C009
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.