LMC662CMX Datasheet, PDF (1/23 Pages) Texas Instruments – LMC662 CMOS Dual Operational Amplifier

LMC662
www.ti.com
SNOSC51C – APRIL 1998 – REVISED MARCH 2013
LMC662 CMOS Dual Operational Amplifier
Check for Samples: LMC662
FEATURES
1
•2 Rail-to-Rail Output Swing
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Low Offset Voltage Drift: 1.3 μV/°C
• Ultra Low Input Bias Current: 2 fA
• Input Common-Mode Range Includes V^−
• Operating Range from +5V to +15V Supply
• I_SS = 400 μA/amplifier; Independent of V+
• Low Distortion: 0.01% at 10 kHz
• Slew Rate: 1.1 V/μs
APPLICATIONS
• High-Impedance Buffer or Preamplifier
• Precision Current-to-Voltage Converter
• Long-Term Integrator
• Sample-and-Hold Circuit
• Peak Detector
• Medical Instrumentation
• Industrial Controls
• Automotive Sensors
DESCRIPTION
The LMC662 CMOS Dual operational amplifier is
ideal for operation from a single supply. It operates
from +5V to +15V and features rail-to-rail output
swing in addition to an input common-mode range
that includes ground. Performance limitations that
have plagued CMOS amplifiers in the past are not a
problem with this design. Input V_OS, drift, and
broadband noise as well as voltage gain into realistic
loads (2 kΩ and 600Ω) are all equal to or better than
widely accepted bipolar equivalents.
This chip is built with TI's advanced Double-Poly
Silicon-Gate CMOS process.
See the LMC660 datasheet for a Quad CMOS
operational amplifier with these same features.
Connection Diagram
Typical Application
Figure 1. 8-Pin PDIP, SOIC
Figure 2. Low-Leakage Sample-and-Hold
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated