LM5039 Datasheet, PDF (1/33 Pages) National Semiconductor (TI) – Half-Bridge PWM Controller with Average Current Limit

LM5039
www.ti.com
SNVS621D – FEBRUARY 2010 – REVISED MARCH 2013
LM5039 Half-Bridge PWM Controller with Average Current Limit
Check for Samples: LM5039
FEATURES
1
•2 105V / 2A Half-Bridge Gate Drivers
• Synchronous Rectifier Control Outputs with
Programmable Delays
• High Voltage (105V) Start-up Regulator
• Voltage-mode Control with Line Feed-Forward
and Volt • Second Limiting
• Programmable Average Current Limit
Balances the Half-Bridge Capacitor Divider
Voltage in an Overload Condition
• Programmable Hiccup Mode Timer Reduces
Power Dissipation During a Continuous
Overload Event
• Adjustable Peak Cycle-by-Cycle Over Current
Protection
• Resistor Programmed, 2MHz Capable
Oscillator
• Patented Oscillator Synchronization
• Programmable Line Under-Voltage Lockout
• Internal Thermal Shutdown Protection
• Adjustable Soft-Start
• Direct Opto-Coupler Interface
• 5V Reference Output
DESCRIPTION
The LM5039 Half-Bridge Controller/Gate Driver
contains all of the features necessary to implement
half-bridge topology power converters using voltage
mode control with line voltage feed-forward. The
LM5039 is a functional variant of the LM5035B half-
bridge PWM controller, featuring average current limit
during an overload event to balance the center-point
of the half-bridge capacitor divider. The floating high-
side gate driver is capable of operating with supply
voltages up to 105V. Both the high-side and low-side
gate drivers are capable of 2A peak. An internal high
voltage startup regulator is included, along with
programmable line undervoltage lockout (UVLO). The
oscillator is programmed with a single resistor to
frequencies up to 2MHz. The oscillator can also be
synchronized to an external clock. A current sense
input provides peak cycle-by-cycle and average
current limit. Other features include adjustable hiccup
mode overload protection, soft-start, revision
reference, and thermal shutdown.
PACKAGES
• HTSSOP-20 (Thermally enhanced)
• WQFN-24 (4mm x 5mm)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated