LM5025C_15 Datasheet, PDF (1/22 Pages) Texas Instruments – LM5025C Active Clamp Voltage Mode PWM Controller

LM5025C
www.ti.com
SNVS568C – SEPTEMBER 2008 – REVISED MARCH 2013
LM5025C Active Clamp Voltage Mode PWM Controller
Check for Samples: LM5025C
FEATURES
1
•2 Internal Start-Up Bias Regulator
• 3A Compound Main Gate Driver
• Programmable Line Under-Voltage Lockout
(UVLO) with Adjustable Hysteresis
• Voltage Mode Control with Feed-Forward
• Adjustable Dual Mode Over-Current Protection
• Programmable Overlap or Deadtime between
the Main and Active Clamp Outputs
• Volt x Second Clamp
• Programmable Soft-start
• Leading Edge Blanking
• Single Resistor Programmable Oscillator
• Oscillator UP / DOWN Sync Capability
• Precision 5V Reference
• Thermal Shutdown
PACKAGE
• TSSOP-16
DESCRIPTION
The LM5025C is a functional variant of the LM5025
active clamp PWM controller. The functional
differences of the LM5025C are: The maximum duty
cycle of the LM5025C is increased from 80% to 91%.
The soft-start capacitor charging current is increased
from 20 µA to 90 µA. The V_CC regulator current limit
threshold is increased from 25 mA to 55 mA. The
CS1 and CS2 current limit thresholds have been
increased to 0.5V. The internal CS2 filter discharge
device has been disabled and no longer operates
each clock cycle. The internal V_CC and V_REF
regulators continue to operate when the line UVLO
pin is below threshold.
The LM5025C PWM controller contains all of the
features necessary to implement power converters
utilizing the Active Clamp / Reset technique. With the
active clamp technique, higher efficiencies and
greater power densities can be realized compared to
conventional catch winding or RDC clamp / reset
techniques. Two control outputs are provided, the
main power switch control (OUT_A) and the active
clamp switch control (OUT_B). The two internal
compound gate drivers parallel both MOS and Bipolar
devices, providing superior gate drive characteristics.
This controller is designed for high-speed operation
including an oscillator frequency range up to 1MHz
and total PWM and current sense propagation delays
less than 100 ns. The LM5025C includes a high-
voltage start-up regulator that operates over a wide
input range of 13V to 90V. Additional features
include: Line Under Voltage Lockout (UVLO),
softstart, oscillator UP/DOWN sync capability,
precision reference and thermal shutdown.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated