LM5009A_15 Datasheet, PDF (1/24 Pages) Texas Instruments – 100-V 150-mA Constant On-Time Buck Switching Regulator

LM5009A
www.ti.com
SNVS608G – JUNE 2009 – REVISED FEBRUARY 2013
100-V 150-mA Constant On-Time Buck Switching Regulator
Check for Samples: LM5009A
FEATURES
1
•2 Operating input voltage range: 6V to 95V
• Integrated 100V, N-Channel buck switch
• Internal start-up regulator
• No loop compensation required
• Ultra-Fast transient response
• On time varies inversely with input voltage
• Operating frequency remains constant with
varying line voltage and load current
• Adjustable output voltage from 2.5V
• Highly efficient operation
• Precision internal reference
• Low bias current
• Intelligent current limit
• Thermal shutdown
• VSSOP-8 and WSON-8 (4mm x 4mm) packages
APPLICATIONS
• Non-Isolated Telecommunication Buck
Regulator
• Secondary High Voltage Post Regulator
• +42V Automotive Systems
DESCRIPTION
The LM5009A is a functional variant of the LM5009
COT Buck Switching Regulator. The functional
differences of the LM5009A are: The minimum input
operating voltage is 6 volts, the on-time equation is
slightly different, and the requirement for a minimum
load current is removed.
The LM5009A Step Down Switching Regulator
features all of the functions needed to implement a
low cost, efficient, Buck bias regulator. This high
voltage regulator contains an 100 V N-Channel Buck
Switch. The device is easy to implement and is
provided in the VSSOP-8 and the thermally enhanced
WSON-8 packages. The regulator is based on a
control scheme using an ON time inversely
proportional to V_IN. This feature allows the operating
frequency to remain relatively constant. The control
scheme requires no loop compensation. An intelligent
current limit is implemented with forced OFF time,
which is inversely proportional to Vout. This scheme
ensures short circuit control while providing minimum
foldback. Other features include: Thermal Shutdown,
V_CC under-voltage lockout, Gate drive under-voltage
lockout, Max Duty Cycle limiter, and a pre-charge
switch.
Typical Application, Basic Step-Down Regulator
6V - 95V
Input
V_IN
C1
R_T
GND
SHUTDOWN
R_CL
VIN
LM5009A
RT/SD
RCL
VCC
BST
SW
RTN
FB
C3
C4
L1
D1
R_FB2
R_FB1
V_OUT
R3
C2
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated