LM4675SDBD Datasheet, PDF (1/23 Pages) Texas Instruments – Ultra-Low EMI, Filterless, 2.65W, Mono, Class D Audio Power Amplifier with Spread Spectrum

LM4675, LM4675SDBD, LM4675TLBD
www.ti.com
SNAS353C – AUGUST 2006 – REVISED MAY 2013
LM4675
Ultra-Low EMI, Filterless, 2.65W, Mono, Class D
Audio Power Amplifier with Spread Spectrum
Check for Samples: LM4675, LM4675SDBD, LM4675TLBD
FEATURES
1
•2 Spread Spectrum Architecture Reduces EMI
• Mono Class D Operation
• No Output Filter Required for Inductive Loads
• Externally Configurable Gain
• Very Fast Turn On Time: 17μs (typ)
• Minimum External Components
• "Click and Pop" Suppression Circuitry
• Micro-Power Shutdown Mode
• Available in Space-Saving 0.5mm Pitch
DSBGA and WSON Packages
APPLICATIONS
• Mobile Phones
• PDAs
• Portable Electronic Devices
KEY SPECIFICATIONS
• Efficiency at 3.6V, 400mW into 8Ω Speaker:
89% (typ)
• Efficiency at 3.6V, 100mW into 8Ω Speaker:
80% (typ)
• Efficiency at 5V, 1W into 8Ω Speaker: 89%
(typ)
• Quiescent Current, 3.6V Supply: 2.2mA (typ)
• Total Shutdown Power Supply Current: 0.01µA
(typ)
• Single Supply Range: 2.4V to 5.5V
• PSRR, f = 217Hz: 82dB
DESCRIPTION
The LM4675 is a single supply, high efficiency,
2.65W, mono, Class D audio amplifier. A spread
spectrum, filterless PWM architecture reduces EMI
and eliminates the output filter, reducing external
component count, board area consumption, system
cost, and simplifying design.
The LM4675 is designed to meet the demands of
mobile phones and other portable communication
devices. Operating on a single 5V supply, it is
capable of driving a 4Ω speaker load at a continuous
average output of 2.2W with less than 1% THD+N. Its
flexible power supply requirements allow operation
from 2.4V to 5.5V. The wide band spread spectrum
architecture of the LM4675 reduces EMI-radiated
emissions due to the modulator frequency.
The LM4675 has high efficiency with speaker loads
compared to a typical Class AB amplifier. With a 3.6V
supply driving an 8Ω speaker, the IC's efficiency for a
100mW power level is 80%, reaching 89% at 400mW
output power.
The LM4675 features a low-power consumption
shutdown mode. Shutdown may be enabled by
driving the Shutdown pin to a logic low (GND).
The gain of the LM4675 is externally configurable
which allows independent gain control from multiple
sources by summing the signals. Output short circuit
and thermal overload protection prevent the device
from damage during fault conditions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated