LM397MFX Datasheet, PDF (1/14 Pages) Texas Instruments – LM397 Single General Purpose Voltage Comparator

LM397
www.ti.com
SNOS977D – MAY 2001 – REVISED MARCH 2013
LM397 Single General Purpose Voltage Comparator
Check for Samples: LM397
FEATURES
1
•2 (T_A = 25°C. Typical Values Unless Otherwise
Specified).
• 5-Pin SOT-23 Package
• Industrial Operating Range −40°C to +85°C
• Single or Dual Power Supplies
• Wide Supply Voltage Range 5V to 30V
• Low Supply Current 300µA
• Low Input Bias Current 7nA
• Low Input Offset Current ±1nA
• Low Input Offset Voltage ±2mV
• Response Time 440ns (50mV Overdrive)
• Input Common Mode Voltage 0 to V_S - 1.5V
DESCRIPTION
The LM397 is a single voltage comparator with an
input common mode that includes ground. The
LM397 is designed to operate from a single 5V to
30V power supply or a split power supply. Its low
supply current is virtually independent of the
magnitude of the supply voltage.
The LM397 features an open collector output stage.
This allows the connection of an external resistor at
the output. The output can directly interface with TTL,
CMOS and other logic levels, by tying the resistor to
different voltage levels (level translator).
The LM397 is available in space saving 5-Pin SOT-
23 package and pin compatible to TI’s TL331, single
differential comparator.
APPLICATIONS
• A/D Converters
• Pulse, Square Wave Generators
• Peak Detector
• Industrial Applications
Connection Diagram
Top View
Typical Circuit
V_S
1
V_IN-
2
GND
5
V_S
R₁
V_IN
-
R_PULL-UP
V_O
+
3
V_IN+
4
OUTPUT
Figure 1. 5-Pin SOT-23 Package
See Package Number DBV0005A
R₃
R₂
Figure 2. Inverting Comparator with Hysteresis
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2013, Texas Instruments Incorporated