LM393-N Datasheet, PDF (1/24 Pages) Texas Instruments – LM193/LM293/LM393/LM2903 Low Power Low Offset Voltage Dual Comparators

LM193-N, LM2903-N, LM293-N, LM393-N
www.ti.com
SNOSBJ6E – OCTOBER 1999 – REVISED MARCH 2013
LM193/LM293/LM393/LM2903 Low Power Low Offset Voltage Dual Comparators
Check for Samples: LM193-N, LM2903-N, LM293-N, LM393-N
FEATURES
1
•2 Wide Supply
– Voltage Range: 2.0V to 36V
– Single or Dual Supplies: ±1.0V to ±18V
• Very Low Supply Current Drain (0.4 mA) —
Independent of Supply Voltage
• Low Input Biasing Current: 25 nA
• Low Input Offset Current: ±5 nA
• Maximum Offset voltage: ±3 mV
• Input Common-Mode Voltage Range Includes
Ground
• Differential Input Voltage Range Equal to the
Power Supply Voltage
• Low Output Saturation Voltage: 250 mV at 4
mA
• Output Voltage Compatible with TTL, DTL,
ECL, MOS and CMOS logic systems
• Available in the 8-Bump (12 mil) DSBGA
Package
• See AN-1112 (SNVA009) for DSBGA
Considerations
ADVANTAGES
• High Precision Comparators
• Reduced V_OS Drift Over Temperature
• Eliminates Need for Dual Supplies
• Allows Sensing Near Ground
• Compatible with All Forms of Logic
• Power Drain Suitable for Battery Operation
DESCRIPTION
The LM193 series consists of two independent
precision voltage comparators with an offset voltage
specification as low as 2.0 mV max for two
comparators which were designed specifically to
operate from a single power supply over a wide range
of voltages. Operation from split power supplies is
also possible and the low power supply current drain
is independent of the magnitude of the power supply
voltage. These comparators also have a unique
characteristic in that the input common-mode voltage
range includes ground, even though operated from a
single power supply voltage.
Application areas include limit comparators, simple
analog to digital converters; pulse, squarewave and
time delay generators; wide range VCO; MOS clock
timers; multivibrators and high voltage digital logic
gates. The LM193 series was designed to directly
interface with TTL and CMOS. When operated from
both plus and minus power supplies, the LM193
series will directly interface with MOS logic where
their low power drain is a distinct advantage over
standard comparators.
The LM393 and LM2903 parts are available in TI’s
innovative thin DSBGA package with 8 (12 mil) large
bumps.
Figure 1. Squarewave Oscillator
Figure 2. Non-Inverting Comparator with
Hysteresis
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated