LM358H Datasheet, PDF (1/33 Pages) Texas Instruments – LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers

LM158-N, LM258-N, LM2904-N, LM358-N
www.ti.com
SNOSBT3H – JANUARY 2000 – REVISED MARCH 2013
LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers
Check for Samples: LM158-N, LM258-N, LM2904-N, LM358-N
FEATURES
1
•2 Available in 8-Bump DSBGA Chip-
Sized Package, (See AN-1112 (SNVA009))
• Internally Frequency Compensated for Unity
Gain
• Large DC Voltage Gain: 100 dB
• Wide Bandwidth (Unity Gain): 1 MHz
(Temperature Compensated)
• Wide Power Supply Range:
– Single Supply: 3V to 32V
– Or Dual Supplies: ±1.5V to ±16V
• Very Low Supply Current Drain (500
μA)—Essentially Independent of Supply
Voltage
• Low Input Offset Voltage: 2 mV
• Input Common-Mode Voltage Range Includes
Ground
• Differential Input Voltage Range Equal to the
Power Supply Voltage
• Large Output Voltage Swing
UNIQUE CHARACTERISTICS
• In the Llinear Mode the Input Common-Mode
Voltage Range Includes Ground and the
Output Voltage Can Also Swing to Ground,
even though Operated from Only a Single
Power Supply Voltage.
• The Unity Gain Cross Frequency is
Temperature Compensated.
• The Input Bias Current is also Temperature
Compensated.
ADVANTAGES
• Two Internally Compensated Op Amps
• Eliminates Need for Dual Supplies
• Allows Direct Sensing Near GND and V_OUT
Also Goes to GND
• Compatible with All Forms of Logic
• Power Drain Suitable for Battery Operation
DESCRIPTION
The LM158 series consists of two independent, high
gain, internally frequency compensated operational
amplifiers which were designed specifically to operate
from a single power supply over a wide range of
voltages. Operation from split power supplies is also
possible and the low power supply current drain is
independent of the magnitude of the power supply
voltage.
Application areas include transducer amplifiers, dc
gain blocks and all the conventional op amp circuits
which now can be more easily implemented in single
power supply systems. For example, the LM158
series can be directly operated off of the standard
+5V power supply voltage which is used in digital
systems and will easily provide the required interface
electronics without requiring the additional ±15V
power supplies.
The LM358 and LM2904 are available in a chip sized
package (8-Bump DSBGA) using TI's DSBGA
package technology.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated